Binding is an integral a part of quilt making, offering each a neat end to the quilt and securing the perimeters. Nevertheless, it might probably generally really feel like a tedious and overwhelming process to finish the binding course of. For those who’re a quilter on the lookout for a stress-free and environment friendly solution to finish your quilt binding, you are in the suitable place. This text will information you thru a simplified methodology that can depart your quilt edges wanting crisp and polished. So, collect your quilt, binding material, and instruments, and prepare to grasp the artwork of ending your quilt binding with confidence.
The standard methodology of ending a quilt binding includes overlapping the material and stitching it down. Nevertheless, this methodology can result in bulkiness and inconsistency within the look of your quilt edge. To keep away from these points, we’ll use a method known as “mitering” the binding. Mitering includes reducing the binding material at a 45-degree angle, making a clear and seamless transition on the corners. This method could appear intimidating at first, however don’t be concerned; we’ll break it down into easy steps, so you possibly can obtain professional-looking outcomes with ease.
As soon as you’ve got mastered the mitering method, finishing the binding course of is a breeze. Merely machine sew or hand sew the binding down across the remaining edges of your quilt. As you’re employed, make sure the binding material is evenly distributed and flat towards the quilt edge. Press the binding as you go for a crisp and polished end. And there you’ve it! With this simplified methodology, you possibly can bid farewell to cumbersome and inconsistent quilt bindings. Your quilts will now have a clear, skilled end that can make you proud to showcase your creations.
Fold Bias Tape in Half
Supplies:
- Bias tape (single or double fold)
- Iron and ironing board
Directions:
- Select bias tape width: Choose a bias tape width that enhances the dimensions of your quilt. Wider bias tape will create a extra pronounced binding, whereas narrower bias tape is extra delicate.
- Reduce bias tape: Measure the perimeter of your quilt twice and lower the bias tape to this size plus 10-12 inches to permit for overlap.
- Press bias tape: Iron the bias tape in half lengthwise, urgent the uncooked edges collectively. It will create a single or double fold (relying on the kind of bias tape you might be utilizing).
- Align bias tape: Place the folded bias tape alongside the sting of your quilt, pinning it in place each 2-3 inches. Be certain that the uncooked edges of the bias tape are aligned with the uncooked edges of the quilt.
- Sew bias tape: Utilizing a stitching machine and an identical thread, sew the bias tape to the quilt. Use a small sew size and a zigzag sew to make sure a safe and sturdy maintain.
- Fold bias tape: Flip the bias tape to the again of the quilt and fold it over the uncooked edge by 1/4-1/2 inch. Press it with an iron to safe the fold.
- Sew bias tape once more: Prime sew the folded bias tape into place utilizing a blind hem sew or a small zigzag sew. It will create a clear and invisible end.
- Miter corners: When reaching corners, create a mitered nook by folding the bias tape in on itself at an angle of 45 levels. Trim the surplus bias tape and press with an iron.
- Bind corners: Sew the mitered corners into place utilizing a blind hem sew or a small zigzag sew.
- Overlap ends: Convey the 2 ends of the bias tape collectively and overlap them by a number of inches. Trim the surplus bias tape.
- Sew ends: Sew the overlapped bias tape into place utilizing a zigzag sew or a blind hem sew.
- Trim threads: Trim any unfastened threads to finish the quilting.
Extra Ideas:
- For an ornamental contact, you should use a contrasting coloration of bias tape to create a standout binding.
- To reinforce the sturdiness of the binding, you possibly can sew it down twice, as soon as from the entrance and as soon as from the again.
- For those who choose a extra detailed look, you possibly can add piping to the within of the bias tape earlier than folding it over the quilt.
| Bias Tape Width | Perimeter of Quilt | Size of Bias Tape |
|---|---|---|
| 1/2 inch | 300 inches | 310-312 inches |
| 3/4 inch | 300 inches | 315-317 inches |
| 1 inch | 300 inches | 320-322 inches |
Be part of Binding Strips with a Diagonal Seam
This methodology is right for becoming a member of binding strips while you wish to create a seamless, mitered nook. It is a bit extra time-consuming than the sq. seam methodology, however the outcomes are price the additional effort.
Step-by-Step Directions
-
Mark the Diagonal
Place two binding strips proper sides collectively and overlapping by 1 1/2 inches. Use a ruler or measuring tape to mark a diagonal line from the highest nook of 1 strip to the underside nook of the opposite.
-
Sew on the Diagonal
Sew alongside the diagonal line, utilizing a 1/4-inch seam allowance. Begin and cease stitching 1/4 inch from every edge.
-
Trim the Extra
Trim away the surplus material from the corners, leaving a 1/4-inch seam allowance. Watch out to not lower into the stitches.
-
Press the Seam Open
Press the seam open utilizing a sizzling iron and a urgent fabric.
-
Trim the Binding
Trim the joined binding strip to the specified width, often 2 1/4 inches.
Ideas for Success
* Use a pointy needle and thread that matches the colour of your binding material.
* Sew slowly and thoroughly to keep away from puckering.
* For those who’re having hassle getting a clear diagonal seam, attempt utilizing a quilting ruler or template.
* Press the seam open completely earlier than trimming the surplus material. It will assist to forestall fraying.
Troubleshooting
In case your diagonal seam is puckered, it is seemingly that you simply stitched too rapidly or used a needle that was too giant. Restitch the seam utilizing a smaller needle and a slower sew velocity.
In case your diagonal seam will not be assembly on the corners, it is seemingly that you simply did not trim the surplus material accurately. Trim away extra of the surplus material and press the seam open once more.
Different Strategies for Becoming a member of Binding Strips
The diagonal seam is only one of a number of strategies for becoming a member of binding strips. Different fashionable strategies embody:
*
Sq. seam
*
French seam
*
Herringbone seam
The most effective methodology for you’ll rely on the material you are utilizing and the look you wish to obtain.
Be part of Binding Strips with a Sq. Seam
This methodology is fast and straightforward, however it’s not as robust because the diagonal seam. It is best fitted to binding small quilts or quilts that won’t be subjected to heavy use.
Step-by-Step Directions
-
Overlap the Strips
Place two binding strips proper sides collectively and overlapping by 1 1/2 inches.
-
Sew the Seam
Sew throughout the overlapping edges, utilizing a 1/4-inch seam allowance.
-
Trim the Extra
Trim away the surplus material from the perimeters, leaving a 1/4-inch seam allowance.
-
Press the Seam Open
Press the seam open utilizing a sizzling iron and a urgent fabric.
Be part of Binding Strips with a French Seam
This methodology creates a clear, enclosed seam that’s each robust and sturdy. It is a sensible choice for binding giant quilts or quilts that might be subjected to heavy use.
Step-by-Step Directions
-
Fold and Sew the Edges
Fold the uncooked edge of 1 binding strip over by 1/4 inch and press. Fold the strip over once more by 1/4 inch and press once more. Sew near the folded edge. Repeat with the opposite binding strip.
-
Place the Strips Proper Sides Collectively
Place the 2 binding strips proper sides collectively, aligning the folded edges.
-
Sew the Seam
Sew alongside the folded edges, utilizing a 1/4-inch seam allowance.
-
Trim the Extra
Trim away the surplus material from the perimeters, leaving a 1/4-inch seam allowance.
-
Flip the Seam to the Inside
Flip the seam to the within of the binding and press.
-
Sew the Binding in Place
Sew the binding across the fringe of the quilt, utilizing your most popular binding methodology.
Be part of Binding Strips with a Herringbone Seam
This methodology creates an ornamental, herringbone-patterned seam. It is a sensible choice for including a contact of curiosity to your quilt binding.
Step-by-Step Directions
-
Overlap the Strips
Place two binding strips proper sides collectively and overlapping by 1 1/2 inches.
-
Sew the Diagonal
Sew two diagonal strains throughout the overlapping edges, beginning and stopping about 1/4 inch from the perimeters.
-
Flip the Strips
Flip the 2 binding strips over and align the perimeters.
-
Sew the Different Diagonal
Sew two extra diagonal strains throughout the overlapping edges, beginning and stopping about 1/4 inch from the perimeters.
-
Trim the Extra
Trim away the surplus material from the perimeters, leaving a 1/
Sew Binding Strips Collectively
The ultimate step in binding a quilt is to sew the binding strips collectively. This may be executed by hand or by machine. In case you are stitching by hand, use a small, sharp needle and thread that matches the colour of the binding material. To sew by machine, use a 1/4-inch seam allowance and a straight sew. Here’s a step-by-step information on methods to sew binding strips collectively:
- Lay one binding strip on a flat floor, proper facet up. Fold the top of the strip over by 1 inch and press. Fold the uncooked fringe of the strip over the folded edge and press once more. It will create a mitered nook.
- Place the second binding strip on high of the primary strip, proper sides collectively. Align the uncooked edges of the strips and stitch them along with a 1/4-inch seam allowance. Proceed stitching till you attain the top of the strips.
- Fold the binding strips over the sting of the quilt and miter the corners. To miter the corners, fold the binding strips at a 45-degree angle and stitch them along with a 1/4-inch seam allowance. Trim any extra material.
Listed here are some ideas for stitching binding strips collectively:
- Use a small, sharp needle to keep away from snagging the material.
- Use thread that matches the colour of the binding material.
- Sew with a 1/4-inch seam allowance.
- Miter the corners for an expert end.
Hand Stitching Binding Strips Collectively
Handy sew binding strips collectively, use a small, sharp needle and thread that matches the colour of the binding material. Here’s a step-by-step information on methods to hand sew binding strips collectively:
- Lay one binding strip on a flat floor, proper facet up. Fold the top of the strip over by 1 inch and press. Fold the uncooked fringe of the strip over the folded edge and press once more. It will create a mitered nook.
- Place the second binding strip on high of the primary strip, proper sides collectively. Align the uncooked edges of the strips and stitch them along with a small, sharp needle and thread. Use a whip sew or a blind sew to stitch the strips collectively.
- Proceed stitching till you attain the top of the strips.
- Fold the binding strips over the sting of the quilt and miter the corners. To miter the corners, fold the binding strips at a 45-degree angle and stitch them along with a small, sharp needle and thread. Use a whip sew or a blind sew to stitch the strips collectively.
- Trim any extra material.
Machine Stitching Binding Strips Collectively
To machine sew binding strips collectively, use a 1/4-inch seam allowance and a straight sew. Here’s a step-by-step information on methods to machine sew binding strips collectively:
- Lay one binding strip on a flat floor, proper facet up. Fold the top of the strip over by 1 inch and press. Fold the uncooked fringe of the strip over the folded edge and press once more. It will create a mitered nook.
- Place the second binding strip on high of the primary strip, proper sides collectively. Align the uncooked edges of the strips and stitch them along with a 1/4-inch seam allowance and a straight sew.
- Proceed stitching till you attain the top of the strips.
- Fold the binding strips over the sting of the quilt and miter the corners. To miter the corners, fold the binding strips at a 45-degree angle and stitch them along with a 1/4-inch seam allowance and a straight sew.
- Trim any extra material.
Troubleshooting Binding Strips
Listed here are some troubleshooting ideas for binding strips:
Downside Answer The binding strips are too brief. Reduce new binding strips which can be longer. The binding strips are too lengthy. Trim the surplus material from the binding strips. The binding strips usually are not sewn collectively evenly. Use a 1/4-inch seam allowance and a straight sew to stitch the binding strips collectively. The binding strips usually are not mitered accurately. Fold the binding strips at a 45-degree angle and stitch them along with a 1/4-inch seam allowance. Learn how to Finish Binding on a Quilt
The binding is the ultimate contact that finishes off a quilt. It may be a easy strip of cloth, or it may be extra elaborate, with mitered corners and ornamental stitching. It doesn’t matter what sort of binding you select, it is essential to ensure it is safe and will not come unfastened over time. Here is a step-by-step information on methods to finish binding on a quilt:
Supplies:
– Quilt
– Binding strips
– Thread
– Scissors
– NeedleAfter you have your supplies, you possibly can start the method of binding your quilt. Observe these steps to finish the venture:
Step 1: Sew the Binding Strips to the Quilt
First, you will want to stitch the binding strips to the quilt. Begin by folding one finish of a binding strip over the sting of the quilt, after which sew it in place. Proceed stitching the binding strip across the complete quilt, mitering the corners as you go. Once you get to the top of the binding strip, overlap the top of the strip by about 1 inch and sew it in place.
Step 2: Flip the Binding to the Again of the Quilt
As soon as the binding strips are sewn on, you will want to show them to the again of the quilt. To do that, fold the binding over the sting of the quilt after which press it in place. Sew the binding all the way down to the again of the quilt, near the sting of the quilt.
Step 3: Miter the Corners
For those who’re utilizing mitered corners, you will have to miter the corners of the binding. To do that, fold the binding at a 45-degree angle after which trim the surplus material. Repeat this step for the opposite facet of the nook after which sew the 2 items of binding collectively. Fold the binding over the nook of the quilt and press it in place. Sew the binding all the way down to the quilt, near the sting of the quilt.
Step 4: End the Binding
As soon as you’ve got sewn the binding across the complete quilt, you will want to complete it off. You are able to do this by hand-stitching the binding all the way down to the quilt, or you possibly can machine-stitch it. For those who’re hand-stitching the binding, use a small, sharp needle and thread that matches the colour of the material. Begin within the heart of 1 facet of the quilt and stitch the binding all the way down to the quilt, making small stitches. Once you get to the nook of the quilt, miter the nook and proceed stitching. As soon as you’ve got sewn the binding across the complete quilt, tie off the thread and trim the surplus material.
Folks Additionally Ask About
How do I make a quilt binding?
To make a quilt binding, you will want to chop strips of cloth which can be 2 1/2 inches extensive. The size of the strips will rely on the dimensions of your quilt. After you have lower the strips, sew them collectively to type an extended strip of binding. Then, fold the binding in half lengthwise and press it in place. Fold the uncooked edges of the binding to the middle crease and press it in place. Sew the binding to the quilt, near the sting of the quilt. Once you get to the nook of the quilt, miter the nook and proceed stitching. As soon as you’ve got sewn the binding across the complete quilt, end it off by hand-stitching the binding all the way down to the quilt or machine-stitching it.
How do I miter the corners of a quilt binding?
To miter the corners of a quilt binding, fold the binding at a 45-degree angle and trim the surplus material. Repeat this step for the opposite facet of the nook after which sew the 2 items of binding collectively. Fold the binding over the nook of the quilt and press it in place. Sew the binding all the way down to the quilt, near the sting of the quilt.
How do I end the binding on a quilt?
To complete the binding on a quilt, you possibly can hand-stitch the binding all the way down to the quilt or machine-stitch it. For those who’re hand-stitching the binding, use a small, sharp needle and thread that matches the colour of the material. Begin within the heart of 1 facet of the quilt and stitch the binding all the way down to the quilt, making small stitches. Once you get to the nook of the quilt, miter the nook and proceed stitching. As soon as you’ve got sewn the binding across the complete quilt, tie off the thread and trim the surplus material.
