When confronted with the daunting prospect of changing a defective gasoline pump in your Honda Silverwing, it is essential to arm your self with the best data and instruments. This step-by-step information will empower you to deal with this activity with confidence, making certain the one that you love Silverwing roars again to life with newfound vigor.
Earlier than diving into the method, it is important to collect the required instruments. You will want a set of screwdrivers, wrenches, and a socket set. Security ought to be your paramount concern, so remember to put on gloves and eye safety all through the process. With all of the instruments in place, find the gasoline pump, which is usually located beneath the gasoline tank. Fastidiously disconnect the gasoline strains and electrical connectors hooked up to the pump.
Eradicating the Aspect Panels
To entry the gasoline pump, you will must take away the aspect panels of the Honda Silverwing. This is an in depth information on the right way to do it:
Step 1: Take away the Entrance Panel
Find the 2 screws securing the entrance panel to the physique. Use a Phillips head screwdriver to take away these screws. Then, rigorously carry the entrance panel off and set it apart.
Step 2: Take away the Underneath Panel
There are six screws securing the beneath panel: two on the entrance, two within the center, and two on the again. Take away these screws with a Phillips head screwdriver. As soon as all of the screws are eliminated, gently pull the beneath panel straight right down to detach it from the physique.
Step 3: Take away the Aspect Panel (Left or Proper)
Find the three screws securing the aspect panel to the physique: one on the prime, one within the center, and one on the backside. Take away these screws with a Phillips head screwdriver. Then, rigorously carry the aspect panel off and set it apart.
| Screw Location | Variety of Screws |
|---|---|
| Entrance Panel | 2 |
| Underneath Panel | 6 |
| Aspect Panel (Left or Proper) | 3 |
Finding the Gasoline Tank
The gasoline tank on the Honda Silverwing is situated beneath the seat. To entry the tank, observe these steps:
1. Take away the seat by lifting up on the entrance of the seat and pulling it in the direction of you.
2. Find the gasoline tank cap on the highest of the tank. The cap is usually black or grey and has a Honda emblem on it.
3. Take away the gasoline tank cap by turning it counterclockwise.
4. Raise the gasoline tank up and out of the bike.
Accessing the Gasoline Pump
The gasoline pump is situated contained in the gasoline tank. To entry the gasoline pump, observe these steps:
1. Take away the gasoline filter from the gasoline pump. The gasoline filter is situated on the aspect of the gasoline pump and is held in place by a single bolt.
2. Take away the gasoline pump from the gasoline tank. The gasoline pump is held in place by 4 bolts. Take away the bolts and carry the gasoline pump out of the tank.
3. Disconnect {the electrical} connector from the gasoline pump.
4. Take away the gasoline pump from the bike.
Gasoline Pump Elimination Desk
| Step | Motion |
|---|---|
| 1 | Take away gasoline filter from gasoline pump |
| 2 | Take away gasoline pump from gasoline tank. |
| 3 | Disconnect electrical connector from gasoline pump. |
| 4 | Take away gasoline pump from bike |
Disconnecting the Gasoline Traces
To disconnect the gasoline strains, you have to to observe these steps:
-
Find the gasoline strains. The gasoline strains are sometimes situated on the aspect of the gasoline tank. They’re often black or blue in colour.
2. Take away the gasoline line clamps. The gasoline line clamps are small metallic clips that maintain the gasoline strains in place. Use a pair of pliers or a screwdriver to take away the clamps.
- **Disconnect the **gasoline strains.
As soon as the gasoline line clamps are eliminated, you possibly can disconnect the gasoline strains by pulling them straight off the gasoline tank. Watch out to not injury the gasoline strains or the gasoline tank when disconnecting them.
| Gasoline Line | Location |
|---|---|
| Provide line | Proper aspect of the tank |
| Return line | Left aspect of the tank |
-
Plug the gasoline strains. As soon as the gasoline strains are disconnected, you have to to plug them to forestall gasoline from leaking out. You need to use a rubber cap or a bit of tape to plug the gasoline strains.
Eradicating the Gasoline Tank
1. **Find the gasoline tank.** The gasoline tank is situated beneath the seat of the bike.
2. **Disconnect the gasoline line.** Use a wrench to loosen the gasoline line clamp and disconnect the gasoline line from the gasoline tank.
3. **Disconnect {the electrical} connector.** Find {the electrical} connector for the gasoline pump and disconnect it.
4. **Take away the gasoline tank bolts.** There are 4 bolts that maintain the gasoline tank in place. Use a wrench to take away these bolts.
Eradicating the Gasoline Pump
1. **Find the gasoline pump.** The gasoline pump is situated contained in the gasoline tank.
2. **Take away the gasoline pump retainer.** Use a screwdriver to take away the screws that maintain the gasoline pump retainer in place.
3. **Pull out the gasoline pump.** As soon as the gasoline pump retainer is eliminated, you possibly can pull out the gasoline pump from the gasoline tank.
Changing the Gasoline Filter
1. **Find the gasoline filter.** The gasoline filter is situated contained in the gasoline tank, close to the gasoline pump.
2. **Take away the gasoline filter.** Use a wrench to loosen the gasoline filter clamp and take away the gasoline filter.
3. **Set up the brand new gasoline filter.** Set up the brand new gasoline filter within the reverse order of removing.
Reinstalling the Gasoline Tank
1. **Place the gasoline tank in place.** Place the gasoline tank in place on the bike.
2. **Set up the gasoline tank bolts.** Tighten the 4 bolts that maintain the gasoline tank in place.
3. **Join {the electrical} connector.** Join {the electrical} connector for the gasoline pump.
4. **Join the gasoline line.** Join the gasoline line to the gasoline tank and tighten the gasoline line clamp.
Accessing the Gasoline Pump
To entry the gasoline pump in a Honda Silverwing, you have to to take away the next parts:
- Seat
- Rear physique panel
- Gasoline tank
- Battery
- Gasoline pump cowl
Eradicating the Gasoline Pump Cowl
1. Find the gasoline pump cowl on the left aspect of the bike, beneath the gasoline tank.
2. Take away the 2 bolts that safe the duvet utilizing a 10mm socket.
3. Fastidiously carry the duvet off the bike.
As soon as the gasoline pump cowl is eliminated, you should have entry to the gasoline pump. The gasoline pump is held in place by a single bolt. Take away this bolt utilizing a 12mm socket and thoroughly carry the gasoline pump out of the gasoline tank.
When reinstalling the gasoline pump, you’ll want to use a brand new O-ring on the gasoline pump inlet. Tighten the gasoline pump bolt to the desired torque and reinstall the gasoline pump cowl.
| Element | Torque |
|---|---|
| Gasoline pump bolt | 10 Nm (7 ft-lbs) |
| Gasoline pump cowl bolts | 5 Nm (3 ft-lbs) |
Disconnecting the Electrical Connector
As soon as the gasoline tank is faraway from the chassis and the gasoline pump meeting is uncovered, you have to to disconnect {the electrical} connector that provides energy to the gasoline pump. Comply with these steps:
1. Find {the electrical} connector on the gasoline pump meeting. It’s sometimes a black or grey plastic connector with a number of wires resulting in it.
2. Press the discharge tab or button on {the electrical} connector. This can launch the locking mechanism that holds the connector in place.
3. Gently pull {the electrical} connector immediately from the gasoline pump meeting. Watch out to not injury the wires or terminals.
4. As soon as {the electrical} connector is disconnected, you have to to take away the gasoline pump meeting from the gasoline tank. To do that, find the mounting bolts or screws that maintain the gasoline pump meeting in place and take away them.
5. Fastidiously carry the gasoline pump meeting out of the gasoline tank.
6. Examine {the electrical} connector for injury or corrosion. If the connector is broken or corroded, it could have to be changed.
7. If {the electrical} connector is in good situation, you possibly can reconnect it to the gasoline pump meeting by following the steps in reverse order.
Eradicating the Gasoline Pump Mount
To take away the gasoline pump mount, you have to to:
- Find the gasoline pump mount. It’s situated on the underside of the gasoline tank, in the direction of the rear of the bike.
- Take away the 2 bolts that safe the gasoline pump mount to the gasoline tank.
- Fastidiously carry the gasoline pump mount off of the gasoline tank.
- Disconnect the gasoline line from the gasoline pump mount.
- Disconnect {the electrical} connector from the gasoline pump.
- Take away the gasoline pump from the gasoline pump mount.
- The seat
- The rear fairing
- The gasoline tank
- The airbox
- The throttle physique
- The engine is tough to start out.
- The engine stalls if you are driving.
- The engine loses energy if you are driving.
- You hear a whining noise coming from the gasoline tank.
7. Examine the gasoline pump mount for any injury or put on.
Fastidiously examine the gasoline pump mount for any indicators of injury or put on. If there may be any injury or put on, the gasoline pump mount could have to be changed. Seek advice from the producer’s directions for particular alternative procedures.
| Injury or Put on | Motion |
|---|---|
| Cracks or breaks | Exchange the gasoline pump mount. |
| Rust or corrosion | Clear the gasoline pump mount with a wire brush and apply a rust-resistant coating. |
| Bent or deformed | Exchange the gasoline pump mount. |
Extracting the Gasoline Pump
1. Security Precautions
Make sure the engine is off and has cooled down. Disconnect the damaging battery terminal for security.
2. Find the Gasoline Pump
Seek advice from your Honda Silverwing’s service handbook to find out the gasoline pump’s actual location.
3. Take away the Gasoline Tank
Find the gasoline tank’s mounting bolts and disconnect any electrical connections. Fastidiously carry the gasoline tank and set it apart.
4. Disconnect the Gasoline Traces
Use gasoline line pliers or a wrench to detach the gasoline strains related to the gasoline pump.
5. Entry the Gasoline Pump Meeting
Relying in your Silverwing mannequin, it’s possible you’ll must take away an entry panel or housing to realize entry to the gasoline pump meeting.
6. Unbolt the Gasoline Pump Meeting
Find the bolts or screws securing the gasoline pump meeting in place and thoroughly take away them utilizing an acceptable socket or wrench.
7. Raise Out the Meeting
As soon as the bolts are eliminated, gently carry the gasoline pump meeting out of its housing.
8. Separating the Gasoline Pump from the Meeting
The gasoline pump is usually secured inside the meeting utilizing a retaining ring or a locking mechanism. Seek advice from your service handbook for particular directions on the right way to safely take away the gasoline pump from the meeting. Normally, this includes utilizing a circlip pliers to take away the retaining ring or rigorously prying the gasoline pump away from the meeting whereas being conscious of potential electrical connections.
9. Examine the Gasoline Pump
As soon as the gasoline pump is extracted, examine it for any seen injury or put on. Examine the filter and gasoline strains for any clogging or particles.
Reinstalling the Gasoline Pump
With the gasoline filter put in, it is time to reassemble the gasoline pump. Begin by rigorously aligning the gasoline pump with the gasket and gasoline filter. As soon as it is in place, safe it with the bolts. Torque the bolts to the desired torque, which will be discovered within the service handbook or within the desk beneath.
| Yr | Torque (Nm) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 2001-2003 | 10 Nm (7.4 ft-lbs) | ||||||||
| 2004-2009 | 12 Nm (8.9 ft-lbs)
As soon as the gasoline pump is secured, reconnect the gasoline line and electrical connector. Double-check that every little thing is related correctly and tightened to the proper torque. Reassembling the Gasoline System10. Reconnecting the Gasoline PumpNow that the gasoline pump is again in place, it is time to reconnect the gasoline strains. Begin by attaching the decrease gasoline line to the pump’s inlet port. Guarantee the road is totally seated and tightened utilizing the equipped clamp. Subsequent, do the identical for the higher gasoline line, which connects to the pump’s outlet port. Once more, be sure that the road is safe. Lastly, reconnect {the electrical} connector to the gasoline pump. Make sure the connector is pushed in firmly till it clicks into place.
With the gasoline strains and electrical connector reconnected, your gasoline system is now reassembled. Use the remaining steps to finish the reinstallation of the gasoline module and tank. Honda Silverwing How To Get To The Gasoline PumpTo get to the gasoline pump on a Honda Silverwing, you have to to take away the next parts: Upon getting eliminated these parts, it is possible for you to to entry the gasoline pump. Watch out when eradicating the gasoline pump, as it’s related to the gasoline strains. Additionally, you will want to exchange the gasoline pump gasket once you set up the brand new gasoline pump. Individuals Additionally Ask About Honda Silverwing How To Get To The Gasoline PumpHow do I do know if my Honda Silverwing gasoline pump is dangerous?There are a number of indicators that will point out that your Honda Silverwing gasoline pump is dangerous. These indicators embody: How a lot does it price to exchange a Honda Silverwing gasoline pump?The price to exchange a Honda Silverwing gasoline pump will fluctuate relying on the yr and mannequin of your bike. Nonetheless, you possibly can count on to pay between $200 and $400 for the components and labor. Can I change the Honda Silverwing gasoline pump myself?Sure, you possibly can change the Honda Silverwing gasoline pump your self. Nonetheless, you will need to observe that it is a advanced restore. In case you are not comfy working in your bike, it’s best to take it to a mechanic. |
