Featured picture:
**
In the case of house enchancment tasks, electrical work could be intimidating. Nevertheless, eradicating an electrical meter is a comparatively easy job that the majority householders can full themselves. By following a number of security precautions and utilizing the proper instruments, you may safely take away your electrical meter and save your self the price of hiring an electrician.
**
Earlier than you start, it is vital to grasp the dangers concerned with working with electrical energy. All the time ensure that the facility to your own home is turned off on the foremost breaker. As soon as the facility is off, you may start eradicating the electrical meter. First, take away the screws that maintain the meter in place. Subsequent, rigorously disconnect the wires which might be related to the meter. As soon as the wires are disconnected, you may take away the meter from the wall.
**
As soon as the electrical meter is eliminated, you may set up a brand new one. To do that, merely reverse the steps that you simply took to take away the previous meter. First, join the wires to the brand new meter. Subsequent, screw the meter into place. Lastly, flip the facility again on on the foremost breaker. When you adopted these steps appropriately, your new electrical meter needs to be up and working.
Security Precautions
Earlier than making an attempt to take away an electrical meter, it’s essential to prioritize security by adhering to the next precautions:
1. De-energize the Circuit
That is probably the most essential security measure. Earlier than any work is finished on the meter, the circuit it serves should be turned off and de-energized. That is usually completed by finding the circuit breaker or fuse field for the precise circuit and flipping the corresponding change or eradicating the fuse. Ensure the facility is totally off by utilizing a non-contact voltage tester to substantiate that there is no such thing as a electrical energy current on the circuit.
Warning: By no means try to take away or work on an electrical meter whereas it’s nonetheless energized. Electrical energy could be extraordinarily harmful and trigger extreme harm or demise.
Further Ideas:
| Tip | Motive |
|---|---|
| Put on applicable protecting gear (insulated gloves, security glasses) | To guard towards potential electrical shock or particles |
| Work on a dry, non-conductive floor | To forestall electrical conduction and potential shock |
| Have a certified electrician help if not sure about any step | To make sure security and correct execution of the duty |
Finding the Electrical Meter
Earlier than you may take away your electrical meter, you have to first find it. The meter is often positioned exterior your own home on a wall or in a meter field. It is very important be aware that the placement of the electrical meter can range relying on the age and design of your own home. If you’re unable to find your electrical meter, you may contact your native utility firm for help.
Exterior Electrical Meter Places
| Location | Description |
|---|---|
| On a wall | The meter is mounted on a wall exterior your own home, normally close to the entrance or aspect door. |
| In a meter field | The meter is enclosed in a steel or plastic field that’s mounted on a wall or put up. |
| On a pedestal | The meter is mounted on a pedestal that’s positioned within the floor. |
Inside Electrical Meter Places
| Location | Description |
|---|---|
| In a basement or crawlspace | The meter is positioned in a basement or crawlspace, normally close to the primary electrical panel. |
| In a utility room | The meter is positioned in a utility room, which is often a small room that homes {the electrical} and plumbing methods. |
| In a storage | The meter is positioned in a storage, normally close to the primary electrical panel. |
Getting ready the Work Space
1. Collect Vital Instruments and Supplies
* Screwdriver(s) (flathead and Phillips)
* Voltage tester
* Electrical tape
* Gloves
* Security glasses
2. Safe the Work Space
* Flip off the primary electrical breaker to the home or condominium.
* Confirm that the facility is off utilizing a voltage tester.
* Clear the work space of any obstacles or flammable supplies.
3. Establish and Label Wires
* Find {the electrical} meter and determine the wires related to it.
* Use electrical tape or labels to mark every wire with its corresponding circuit or system.
| Wire Colour | Circuit/Machine |
|---|---|
| Black | Sizzling wire from foremost panel |
| Crimson | First department circuit |
| Blue | Second department circuit |
| Yellow | Third department circuit |
| White | Impartial wire |
| Inexperienced or naked | Floor wire |
* Word that wire colours could range relying in your electrical system. Confirm the precise colours utilized in your own home by consulting a certified electrician or referring to your own home’s electrical schematic.
Disconnecting the Electrical Service
Earlier than you may take away the electrical meter, you have to first disconnect the electrical service. This could solely be carried out by a certified electrician.
To disconnect the electrical service, the electrician will first must find the primary electrical panel. That is normally positioned within the basement, storage, or utility room. As soon as the primary electrical panel has been positioned, the electrician might want to flip off the primary breaker. It will reduce off all energy to the home.
As soon as the primary breaker has been turned off, the electrician might want to take away the duvet from {the electrical} panel. It will expose the wires and terminals. The electrician will then must disconnect the wires which might be related to the electrical meter. As soon as the wires have been disconnected, the electrical meter could be eliminated.
Security Precautions
It is very important take security precautions when disconnecting the electrical service. These precautions embody:
- By no means try to disconnect the electrical service your self until you’re a certified electrician.
- All the time flip off the primary breaker earlier than you disconnect any wires.
- Watch out to not contact any uncovered wires or terminals.
- If you’re not sure about any of the steps concerned in disconnecting the electrical service, contact a certified electrician for help.
Eradicating the Electrical Meter
As soon as the electrical service has been disconnected, the electrical meter could be eliminated. To take away the electrical meter, the electrician might want to:
- Unscrew the screws which might be holding the meter in place.
- Rigorously raise the meter off of the mounting bracket.
- Disconnect the wires which might be related to the meter.
As soon as the electrical meter has been eliminated, it may be disposed of based on native rules.
Further Data
Along with the data supplied above, listed here are some extra issues to bear in mind when disconnecting the electrical service and eradicating the electrical meter:
| Merchandise | Description |
|---|---|
| Electrical Meter Elimination Charge | Some utility firms cost a payment for eradicating an electrical meter. |
| Electrical Meter Disposal | Electrical meters include hazardous supplies and needs to be disposed of based on native rules. |
Eradicating the Meter Base
The meter base is the housing that comprises the meter and its connections. It’s usually mounted on the aspect of a constructing and related to the electrical utility’s energy strains. Earlier than you may take away the meter, you have to first take away the meter base.
To take away the meter base, comply with these steps:
1. **Flip off the facility to the meter base.** This may be carried out on the foremost breaker or fuse field inside your own home.
2. **Take away the duvet from the meter base.** The quilt is often held in place by screws or bolts.
3. **Disconnect the wires from the meter.** The wires are usually related to the meter with screws or bolts.
4. **Take away the meter from the meter base.** The meter is often held in place by screws or bolts.
5. **Take away the meter base from the wall.** The meter base is often held in place by screws or bolts. If the meter base is mounted on a pipe, you could want to make use of a pipe wrench to take away it.
Instruments and supplies you will want |
Security Precautions
|
|
Dismantling the MeterAs soon as the meter has been disconnected from the circuit, you may start dismantling it. Begin by eradicating the screws that maintain the meter in place throughout the enclosure, after which proceed with the next steps: Step 1: Take away the duvetUse a screwdriver to take away the screws that maintain the duvet in place, after which raise the duvet off. Step 2: Disconnect the wiresUse a pair of pliers to disconnect the wires from the terminals on the meter. Watch out to not contact the naked ends of the wires, as this might trigger {an electrical} shock. Step 3: Take away the meterAs soon as the wires have been disconnected, you may take away the meter from the enclosure. Watch out to not drop the meter, as this might harm it. Step 4: Examine the meterAs soon as the meter has been eliminated, examine it for any harm. If the meter is broken, it يجب استبداله. If the meter shouldn’t be broken, you may proceed with the following step. Step 5: Clear the meterUse a tender material to wash the meter. Watch out to not use any harsh chemical substances, as this might harm the meter. Step 6: Reinstall the meterAs soon as the meter has been cleaned, you may reinstall it within the enclosure. Make sure you join the wires to the proper terminals, after which tighten the screws that maintain the meter in place.
Figuring out Meter WiringEarlier than disconnecting any wires, it is essential to determine them precisely. It will be certain that you reconnect them appropriately later and forestall any electrical hazards. 1. Flip Off Energy at Essential BreakerEarlier than continuing, be certain that the primary electrical breaker is turned off to chop off energy provide to the meter. 2. Take away Meter CowlFind the screws or latches holding the meter cowl in place and thoroughly take away it. 3. Word Wire Colours and PositionsObserve the wiring contained in the meter and be aware the colours and positions of the wires related to the meter terminals. Sometimes, black wires point out a scorching (stay) connection, crimson signifies one other scorching connection (in some circumstances), white signifies impartial, and inexperienced or naked copper signifies grounding. 4. Take Photos or Make a DiagramTake clear photos or sketch a diagram of the wiring association to function a reference when reconnecting. 5. Verify for A number of Meter Sockets (Elective)In some installations, there could also be a number of meter sockets. If so, determine which socket corresponds to the meter you are eradicating. 6. Verify for Anti-Tampering Units (Elective)Some meters could have anti-tampering gadgets put in. Find and take away any such gadgets rigorously. 7. Troubleshooting Widespread Wiring Configurations
Eradicating the Meter from the BaseAs soon as the facility has been turned off and the meter has been disconnected from the wires, you may take away it from the bottom. To do that, merely comply with these steps:
Ideas for Eradicating the Meter from the Base
Security Precautions* All the time flip off the facility earlier than engaged on any electrical gear. Correctly Disposing of the Outdated MeterUpon getting eliminated the previous meter, you will need to get rid of it correctly. Electrical meters include mercury, which is a hazardous materials that may be dangerous to the surroundings and human well being. Mercury can leach into the soil and groundwater, and it can be vaporized into the air if the meter shouldn’t be disposed of correctly. There are a number of alternative ways to get rid of an previous electrical meter. 1. Contact your native utility firm. Many utility firms provide free or low-cost applications to recycle previous meters. 2. Take the meter to a hazardous waste disposal facility. These services are specifically outfitted to deal with hazardous supplies, and they’re going to get rid of the meter in a protected and environmentally pleasant method. 3. Mail the meter to a recycling firm. There are a variety of firms focusing on recycling previous electrical meters. You could find a listing of those firms on-line. If you end up packaging the previous meter for disposal, you’ll want to wrap it in plastic or bubble wrap to forestall it from breaking. You also needs to label the bundle clearly with the phrases “hazardous waste.” It will assist to make sure that the meter is disposed of correctly. By following these steps, you may assist to guard the surroundings and human well being.
Reconnecting the Electrical ServiceAs soon as the electrical meter has been eliminated, you have to to reconnect the electrical service. This needs to be carried out by a certified electrician to make sure that it’s carried out safely and appropriately. The electrician might want to join the wires from the primary breaker panel to the electrical meter after which activate the primary breaker. As soon as the electrical service is reconnected, it is best to verify to ensure that the entire home equipment and lights in your house are working correctly. 10. Reconnecting the Electrical ServiceTo reconnect the electrical service, you have to the next instruments and supplies:
Upon getting gathered the mandatory instruments and supplies, you may comply with these steps to reconnect the electrical service:
How To Take away Electrical MeterEarlier than you start, it is vital to notice that eradicating an electrical meter could be harmful should you shouldn’t have the correct coaching. If you’re not comfy working with electrical energy, it’s best to rent a certified electrician to do the job for you. To take away an electrical meter, you have to the next instruments:
Upon getting gathered your instruments, comply with these steps to take away the electrical meter:
Upon getting eliminated the electrical meter, you may set up a brand new one by following the steps in reverse order. Folks Additionally Ask:How do I do know if my electrical meter is damaged?There are a number of indicators that will point out that your electrical meter is damaged. These embody:
Can I take away my electrical meter myself?Sure, you may take away your electrical meter your self, however you will need to be aware that this may be harmful should you shouldn’t have the correct coaching. If you’re not comfy working with electrical energy, it’s best to rent a certified electrician to do the job for you. How a lot does it price to take away an electrical meter?The fee to take away an electrical meter will range relying on the complexity of the job and the electrician you rent. Nevertheless, you may anticipate to pay between $50 and $100 for this service.
|
|---|
