img src=”https://tse1.mm.bing.web/th?q=$title$” alt=”$title$”
In the event you’re on the lookout for a means so as to add some further storage and group to your kitchen, a lazy Susan is a good possibility. They’re excellent for storing spices, oils, and different small gadgets that it is advisable to entry often, and so they may also help you retain your counters clear and clutter-free. Plus, they’re comparatively simple to make, so it can save you your self some cash by making your individual. On this article, we are going to give you a step-by-step information on tips on how to make a lazy Susan. We can even embody some suggestions and tips that will help you get probably the most out of your new lazy Susan.
To make a lazy Susan, you will have the next supplies: a chunk of plywood or MDF, a drill, a jigsaw, wooden glue, and a lazy Susan bearing. Additionally, you will want some sandpaper and paint or stain, if desired. After getting gathered your supplies, you’ll be able to observe these steps to make your individual lazy Susan:
1. Reduce a circle out of the plywood or MDF. The scale of the circle will rely upon the scale of the lazy Susan you need to make.
2. Reduce a smaller circle out of the middle of the bigger circle. This would be the gap for the lazy Susan bearing.
3. Drill a gap within the heart of the smaller circle. This gap needs to be massive sufficient to suit the lazy Susan bearing.
4. Glue the lazy Susan bearing into the opening within the smaller circle.
5. Connect the smaller circle to the bigger circle utilizing wooden glue.
6. Sand the sides of the lazy Susan till they’re clean.
7. Paint or stain the lazy Susan, if desired.
How you can Make a Lazy Susan
A lazy Susan is a rotating platform that makes it simple to entry gadgets in a hard-to-reach place. It may be utilized in cupboards, pantries, and on counter tops. Making a lazy Susan is a straightforward challenge that may be accomplished in a couple of hours.
To make a lazy Susan, you will have the next supplies:
- A bit of plywood or MDF that’s at the very least 12 inches in diameter
- A lazy Susan bearing
- Wooden screws
- A drill
- A screwdriver
Directions:
- Reduce the plywood or MDF right into a circle. The circle needs to be at the very least 12 inches in diameter.
- Drill a gap within the heart of the circle. The opening needs to be massive sufficient to suit the lazy Susan bearing.
- Connect the lazy Susan bearing to the circle. Safe the bearing with wooden screws.
- Place the lazy Susan on a flat floor. Add gadgets to the lazy Susan as desired.
Folks Additionally Ask
How do I make a lazy Susan and not using a bearing?
You may make a lazy Susan and not using a bearing through the use of a chunk of plywood or MDF and a pair of ball bearings. Drill a gap within the heart of the plywood or MDF and insert the ball bearings. The ball bearings will permit the lazy Susan to rotate easily.
What can I take advantage of as a substitute of a lazy Susan bearing?
You need to use a pair of ball bearings, a turntable bearing, or a drawer slide as a substitute of a lazy Susan bearing.
Can I make a lazy Susan from scratch?
Sure, you may make a lazy Susan from scratch utilizing a chunk of plywood or MDF and a lazy Susan bearing.
