The American flag is a strong image of our nation’s values and beliefs. It’s a reminder of the sacrifices which were made to guard our freedoms and a beacon of hope for the longer term. As such, you will need to show the flag with respect and in accordance with the Flag Code. A technique to do that is to hold the flag vertically.
There are just a few alternative ways to hold the flag vertically. A technique is to make use of a flagpole adapter. This gadget suits onto the highest of a daily flagpole and lets you grasp the flag vertically. One other technique to grasp the flag vertically is to make use of a wall-mounted flag bracket. This bracket is connected to the wall and has a hook or rod from which the flag will be hung.
Regardless of which methodology you select, remember to comply with the Flag Code when hanging the flag vertically. The Flag Code states that the flag ought to be displayed with the union (the blue area with 50 stars) on the prime and the stripes hanging down. The flag must also be flown at half-staff on Memorial Day and different days of mourning.
Vertical Flag Tips
When displaying the American flag vertically, it is essential to stick to the next pointers to make sure correct decorum:
-
Orientation:
The flag ought to be hung with the blue union (the sector of stars) on the prime, and the crimson and white stripes hanging vertically to the proper. If the flag is held on a wall, the union ought to be on the left facet as considered from the entrance.
For a vertical show, the flag ought to be not less than so long as it’s broad, with a minimal width of 20 inches. If the flag is flown outdoors, it ought to be not less than 6 ft broad and 10 ft lengthy.
When hanging the flag vertically, it is essential to make sure that the union is clearly seen and that the stripes move naturally in direction of the underside. Keep away from obscuring the flag with different objects or hanging it in a approach that distorts its form.
Choosing the Correct Flag
Selecting the Right Dimension
The vertical positioning of an American flag necessitates a unique dimension than its horizontal counterpart. The ratio for a vertical flag ought to be 2:3, whereas the horizontal flag follows a ten:19 ratio.
Consult with the desk beneath for particular measurements primarily based on the variety of stars:
| Variety of Stars | Top (ft.) | Width (ft.) |
|---|---|---|
| 13 | 3 | 2 |
| 15 | 3.5 | 2.5 |
| 20 | 4 | 3 |
| 25 | 4.5 | 3.5 |
| 30 | 5 | 4 |
Materials Issues
For a vertical flag meant for out of doors show, sturdy supplies like nylon or polyester are advisable. These materials can stand up to the weather and keep their vibrant colours over time. For indoor use, a lighter materials like cotton will be appropriate.
Flag Orientation
When hanging a vertical American flag, be sure that it’s displayed with the celebrities on the prime and the stripes on the right-hand facet (when dealing with the flag). That is the right orientation for a vertical flag, versus a horizontal flag the place the celebrities are positioned within the higher left nook.
Measuring the Wall and Flag
Measuring the Wall
To make sure a exact and aesthetically pleasing show, it’s essential to measure the wall the place you propose to hold the flag. Use a measuring tape to find out its width and top, from the ground to the ceiling.
Measuring the Flag
Retrieve the American flag you intend to hold vertically and lay it out flat on a desk or different even floor. Measure the width (size of the stripes) and top (top of the blue area) of the flag utilizing a measuring tape.
Figuring out the Optimum Placement
To attain a balanced and visually interesting association, comply with these pointers:
- Centering: Place the flag within the middle of the wall horizontally (centered between the left and proper edges) and vertically (centered between the ground and ceiling).
- Flag’s Top vs. Wall’s Top: The flag’s top ought to be roughly two-thirds to three-quarters of the wall’s top. This proportion creates a visually harmonious show.
- Star Area Placement: For a vertical show, the blue star area ought to be positioned on the higher proper nook of the flag when considered from the entrance. This orientation represents the place of the celebrities within the evening sky.
- Adjusting for Non-Customary Wall Sizes: If the wall’s top or width isn’t appropriate for a standard-sized flag, you might must buy a custom-sized flag or modify its placement accordingly.
Here’s a desk summarizing the advisable proportions for hanging a flag vertically:
| Wall Top | Really useful Flag Top |
|---|---|
| 6-8 ft | 4-6 ft |
| 9-12 ft | 6-9 ft |
| Over 12 ft | Customized-sized flag advisable |
Figuring out the Top and Width
To find out the suitable top and width for a vertically hung American flag, contemplate the next pointers:
Flagpole Top
The flagpole top ought to be not less than 1.5 instances the flag’s top. For instance, a 3′ x 5′ flag would require a flagpole top of not less than 4.5′.
Flag Width
The flag’s width ought to be roughly 7/10 of its top. A 3′ x 5′ flag has a width of seven/10 x 3′ = 2.1′.
Flag Side Ratio
The flag’s side ratio (top to width ratio) ought to be 1.9:1. Which means for each 1.9 inches of top, there ought to be 1 inch of width.
| Flag Dimensions | |
|---|---|
| Top | Width |
| 3′ | 2.1′ |
| 4′ | 2.8′ |
| 5′ | 3.5′ |
Marking the Middle Level
To make sure the flag hangs accurately and symmetrically, it’s essential to mark the middle level. Observe these steps to precisely find the middle:
1. Measure the Top
Utilizing a measuring tape or ruler, decide the general top of the flag from prime to backside.
2. Divide by Two
Divide the peak measurement by two to seek out the midway level. This offers you the approximate location of the middle.
3. Mark the Again
Flip the flag over to the again facet. Utilizing a material marker or chalk, mark the middle level on the again of the flag utilizing a straight line.
4. Create a Help
If you’re hanging the flag on a floor that doesn’t have a vertical help, corresponding to a wall, you will want to create a help rod. This generally is a picket dowel, steel rod, or some other sturdy materials that may maintain the flag in place.
5. Cling the Rod
Connect the help rod to the floor, guaranteeing that it’s stage. Align the rod with the middle line you marked on the again of the flag. The rod will act because the anchor level for hanging the flag vertically.
Utilizing String or Measuring Tape
Marking the High of the Flag
1. Lay the flag flat on a clear floor.
2. Fold the flag in half lengthwise, bringing the star area and stripes collectively.
3. Crease the middle fold from prime to backside, securing it with binder clips or tape.
4. Unfold the flag, leaving the middle crease seen.
5. Discover the middle of the highest fringe of the flag by measuring it from both facet.
6. Minimize a chunk of string or measuring tape to the size you need for the flag’s hanging top.
7. Fold the string or tape in half and mark the midpoint.
8. Place the midpoint of the string or tape on the middle of the highest fringe of the flag, aligning it with the middle crease.
9. Tape or clip the string or tape to the flag, leaving a loop on the prime for hanging.
Securing the Flag
1. Tie a knot on the finish of the string or tape to create a loop.
2. Hook the loop onto a hook or nail pushed into the wall.
3. Alter the string or tape to make sure the flag hangs vertically and the stripes are parallel to the ground.
Hanging the Flag with Nails or Hooks
Hanging the American flag vertically requires particular measurements and methods to make sure it’s displayed respectfully and correctly. When utilizing nails or hooks for vertical hanging, comply with these steps:
1. Decide the Middle of the Flag
Fold the flag in half lengthwise, then in half once more widthwise. The intersection of the folds marks the middle of the flag.
2. Mark the Wall
Measure the gap from the ceiling to the ground the place the flag ought to grasp. Divide this measurement by two and mark this level on the wall.
3. Discover the Flag’s High Edge
Measure the peak of the flag and subtract 2 inches. That is the gap from the highest of the pole to the highest of the flag.
4. Mark the Flag’s High Edge on the Wall
Measure down from the marked level on the wall by the peak calculated in step 3. That is the place the highest fringe of the flag ought to be hung.
5. Drive Nails or Insert Hooks
Drive two nails or insert two hooks into the wall, spaced evenly about 6 inches aside. The nails or hooks ought to be on the top marked in step 4.
6. Connect the Pole to the Nails or Hooks
Insert the flagpole into the rings or grommets on the highest fringe of the flag. Cling the flag by looping the pole over the nails or hooks on the wall.
7. Place the Flag Accurately
Make sure that the celebrities on the flag are dealing with the highest and that the blue area is on the left facet of the observer. The stripes ought to grasp vertically and be parallel to the wall.
| Star Area | Stripe Area |
|---|---|
| High | Backside |
| Left | Proper |
Extra Ideas for Stability
8. Safe the Rope to the Pole Utilizing a Knot
There are various various kinds of knots that can be utilized to safe a rope to a pole. Nevertheless, not all knots are created equal. When selecting a knot, you will need to contemplate the next elements:
- The power of the knot: The knot ought to have the ability to stand up to the pressure of the wind and the burden of the flag.
- The convenience of tying the knot: The knot ought to be simple to tie, even in sturdy winds.
- The sturdiness of the knot: The knot ought to have the ability to stand up to the weather and repeated use.
Based mostly on these elements, there are three knots which are generally used to safe a rope to a pole:
- The clove hitch: The clove hitch is an easy and safe knot that’s simple to tie. It’s generally used to safe a ship to a dock or to tie a rope to a tree.
- The sq. lashing: The sq. lashing is a robust and sturdy knot that’s excellent for securing a rope to a pole. It’s generally used to construct constructions corresponding to bridges and fences.
- The taut-line hitch: The taut-line hitch is a flexible knot that can be utilized to safe a rope to a pole or to regulate the strain of a rope. It’s generally used to tie down a tent or to safe a load to a truck.
After you have chosen a knot, comply with these steps to safe the rope to the pole:
- Move the rope across the pole and produce the ends collectively.
- Tie the knot based on the directions.
- Pull on each ends of the rope to tighten the knot.
- Trim any extra rope.
Hanging the Flag in Out of doors Areas
When displaying the American flag vertically, it ought to be oriented in order that the blue area with the celebrities is on the left and the stripes are on the proper from the viewer’s perspective. This orientation ensures that the Union (blue area) is within the right place of honor.
Flagpole Show
- The flag ought to be flown from a flagpole that’s tall sufficient for the flag to fly freely with out touching the bottom or some other objects.
- The flagpole ought to be sturdy sufficient to resist the wind and climate circumstances.
- The flag ought to be raised and lowered in a dignified method.
- The flag ought to be flown throughout the day, from dawn to sundown, until it’s illuminated at evening.
Wall Show
- The flag ought to be displayed on a wall or different vertical floor.
- The flag ought to be hung in order that the blue area with the celebrities is on the prime.
- The flag ought to be taut and wrinkle-free.
- The flag shouldn’t be displayed in a approach that it might be broken or dirty.
Different Issues
- The American flag ought to by no means be flown the wrong way up besides as a misery sign.
- The American flag shouldn’t be flown in inclement climate, corresponding to throughout a storm.
- The American flag ought to be disposed of correctly when it turns into worn or torn.
| Really useful Flagpole Heights |
|---|
| 15 ft for a 3’x5′ flag |
| 20 ft for a 4’x6′ flag |
| 25 ft for a 5’x8′ flag |
Respecting the American Flag
1. It ought to be displayed ready of honor.
This implies it ought to be positioned on the right-hand facet of different flags, or above them if they’re hung vertically.
2. No different flag ought to fly greater than the American flag.
If there’s one other flag flown, it ought to be positioned on the left or on the similar stage.
3. The flag shouldn’t contact the bottom.
If it does, it ought to be cleaned or changed instantly.
4. The flag shouldn’t be used as clothes or for some other goal.
It ought to solely be used for ceremonial or ornamental functions.
5. The flag ought to be handled with respect.
This implies not folding it up haphazardly or utilizing it as a doormat.
6. The flag ought to be correctly folded when not in use.
As stipulated by the flag code, the flag is to be folded within the following method:
- Fold the flag lengthwise, bringing the striped finish to the highest and the blue area to the underside.
- Fold the flag in half widthwise, bringing the striped finish to the blue area.
- Tuck the underside nook of the flag up and over the blue area, making a triangle.
- Proceed folding the flag on this method till it’s fully folded.
7. The flag ought to be flown at half-mast on sure events.
To indicate respect, the flag ought to be flown at half-mast after the dying of a president, vp, or different high-ranking official. It must also be flown at half-mast on Memorial Day, and on Peace Officers Memorial Day.
8. The flag ought to be displayed always of day.
The flag shouldn’t solely be displayed throughout the day, it may also be displayed at evening, however it have to be illuminated.
9. The flag ought to be correctly saved when not in use.
The easiest way to retailer the flag is in a dry, darkish, and funky place. It must also be positioned in a container that may defend it from mud and moisture.
10. The flag ought to be changed when it’s worn or torn.
To indicate respect, the flag shouldn’t be displayed whether it is worn or torn. The next are some particular guidelines for when to switch the flag:
| Situation | When to Exchange |
|---|---|
| Fading or fraying | When the colours begin to fade or the material begins to fray |
| Tearing | When there’s a tear or gap within the cloth |
| Soiling | When the flag is soiled or stained |
How To Cling American Flag Vertically
The American flag is a logo of our nation and our freedom. It ought to be handled with respect and displayed in a correct method. When hanging the flag vertically, there are some things to remember.
First, the flag ought to be hung with the blue area on the left and the white stripes on the proper. The celebs ought to be on the prime of the flag and the stripes ought to be hanging down. The flag ought to be hung at a top the place it will likely be seen to all who move by.
If you’re hanging the flag from a wall, it’s best to use a flagpole or different acceptable help. The flag ought to be hung from the highest of the workers, and it ought to be taut sufficient in order that it’s not wrinkled or sagging.
If you’re hanging the flag from a flagpole, it’s best to guarantee that the flagpole is sturdy sufficient to help the burden of the flag. The flag ought to be raised to the highest of the pole, and it ought to be secured with a rope or clasp.
Individuals Additionally Ask
Which Facet of the Flag Faces Out When Displayed Vertically?
When the American flag is displayed vertically, the blue area with the celebrities ought to be positioned on the left facet of the flag and the white stripes ought to be on the proper facet.
How Excessive Ought to I Cling the Flag When Displayed Vertically?
When the American flag is displayed vertically, it ought to be hung at a top the place it will likely be seen to all who move by.
Can I Cling the Flag from My Home or Condo?
Sure, you’ll be able to grasp the American flag from your home or residence. Nevertheless, it’s best to guarantee that the flag is displayed in a respectful method and that it’s not broken or desecrated.
