If you happen to’re a PC gamer, you realize that your graphics card is likely one of the most necessary parts in your system. It is liable for rendering the pictures you see in your display, and graphics card could make an enormous distinction in your gaming expertise. However what occurs in case your graphics card begins to fail? Or if you wish to improve to a brand new mannequin? In that case, you may have to know take out your previous graphics card.
Eradicating a graphics card is a comparatively easy course of, however there are some things it’s good to do to verify it goes easily. First, you may have to energy down your pc and unplug it from the facility outlet. Then, open up your pc case and find the graphics card. It is going to be an extended, slim card with a fan or warmth sink on it. As soon as you have discovered the graphics card, you may have to take away the screws which can be holding it in place. Watch out to not lose these screws, as you may want them to reinstall the cardboard later.
As soon as the screws are eliminated, you may gently pull the graphics card out of its slot. Watch out to not injury the cardboard or the slot. As soon as the cardboard is out, you may disconnect the facility cables from it. Lastly, you may take away the graphics card out of your pc case. Now that you have eliminated your previous graphics card, you may set up your new one. The method is actually the identical in reverse. First, insert the brand new card into the slot. Then, safe it with the screws. Lastly, join the facility cables to the cardboard. As soon as the cardboard is put in, you may energy in your pc and begin gaming.
[Image of a graphics card being removed from a computer case]
Disconnect Energy and Peripherals
Earlier than you begin, it is necessary to take some security precautions to stop any injury to your parts. First, ensure your pc is turned off and unplugged from the facility outlet. Subsequent, floor your self by touching a steel object, reminiscent of a doorknob or water faucet. This can assist to discharge any static electrical energy that would injury your graphics card.
When you’re grounded, it is time to begin disconnecting the facility and peripherals out of your graphics card. To do that, observe these steps:
- Find the facility connectors on the graphics card. They are going to be situated on the highest or aspect of the cardboard, and they’re going to sometimes be both 6-pin or 8-pin connectors.
- Unplug the facility connectors from the graphics card. To do that, merely press down on the discharge latch on the connector and pull it straight out.
- Disconnect any peripherals which can be linked to the graphics card. This consists of any screens, HDMI cables, or different gadgets.
As soon as you have disconnected the facility and peripherals out of your graphics card, you may proceed to the subsequent step of the removing course of.
Take away Case Facet Panel
Earlier than you start, ensure to energy down your pc and unplug it from the facility outlet. Additionally, you will have to discharge any static electrical energy by touching a steel object, reminiscent of the pc case. Find the aspect panel screws on the again of the case and take away them.
1. Determine the Facet Panel
The aspect panel is often made from steel or plastic and is held in place by screws. Find the screws that maintain the aspect panel in place. They’re normally situated on the again of the case.
2. Take away the Screws
Use a screwdriver to take away the screws that maintain the aspect panel in place. Watch out to not drop the screws or lose them.
3. Raise the Panel
As soon as the screws are eliminated, elevate the aspect panel up and away from the case. Watch out to not injury the panel or the parts contained in the case.
4. Slide the Panel Ahead
In some instances, it’s possible you’ll want to slip the aspect panel ahead earlier than lifting it up. It is because the panel could also be held in place by a lip or groove on the entrance of the case.
5. Take away the Panel
As soon as the aspect panel has been eliminated, you should have entry to the parts contained in the case. Now you can proceed with the remainder of the directions.
Find the Graphics Card
To start, it’s good to find the graphics card inside your pc. Here is do it:
- Determine the growth slots: Open the pc case and find the growth slots on the motherboard. These slots are sometimes lengthy and skinny, with a plastic or steel clip on the finish. You will normally discover them in direction of the underside of the motherboard.
- Discover the graphics card slot: Among the many growth slots, you may see a slot that is wider and longer than the others. That is the slot for the graphics card.
- Find the graphics card: The graphics card is often the biggest and most noticeable element put in on this slot. It would have a big steel heatsink and cooling followers on high. It might even have a number of video outputs on the again of the pc, reminiscent of HDMI or DisplayPort.
| Graphics Card Slot | Description |
|---|---|
| PCIe x16 | Commonest slot for contemporary graphics playing cards |
| AGP | Older slot used for graphics playing cards earlier than PCIe |
| PCI | Even older slot, not generally used for graphics playing cards |
Verify for the Launch Latch
The discharge latch is a small lever or button that secures the graphics card in its slot. It’s normally situated on the tip of the cardboard, close to the again of the pc case. To launch the latch, merely push down or pull it again. This can disengage the cardboard from the slot and help you take away it.
Varieties of Launch Latches
There are two most important sorts of launch latches:
1. Push-down latch: This kind of latch is launched by pushing down on the lever. It’s the commonest kind of launch latch discovered on graphics playing cards.
2. Pull-back latch: This kind of latch is launched by pulling again on the lever. It’s much less frequent than the push-down latch.
You may normally inform which sort of latch your graphics card has by trying on the finish of the cardboard. If there’s a small button or lever that may be pushed down, then it’s a push-down latch. If there’s a lever that may be pulled again, then it’s a pull-back latch.
| Launch Latch Sort | Motion |
|---|---|
| Push-down latch | Push down on the lever |
| Pull-back latch | Pull again on the lever |
Rigorously Press Down on the Latch
After you have situated the latch, it is time to rigorously press down on it. Here is a extra detailed information on how to do that:
-
Use your thumb to find the latch on the aspect of the graphics card. It is normally a small, plastic lever that must be pushed down.
-
Gently apply downward stress to the latch. Don’t use extreme power, as this might injury the graphics card.
-
Maintain the latch down when you gently pull the graphics card out of the PCIe slot.
-
As soon as the graphics card is evident of the slot, elevate it up and out of the pc case.
-
Place the graphics card in an anti-static bag for safekeeping till you might be prepared to put in it in a brand new pc.
Security Tip: At all times deal with graphics playing cards with care to keep away from damaging the fragile parts.
| Latch Location | Latch Motion |
|---|---|
| Facet of graphics card | Push down |
| PCIe slot | Pull out |
Unplug Energy Cables
Earlier than you may take away the graphics card, it’s essential to unplug the facility cables which can be linked to it. These cables are normally situated on the high or aspect of the cardboard. They’re sometimes black or blue in coloration, they usually might have 6 or 8 pins. If it’s good to take out an 8 pin pcie energy cable, it’s essential to press a launch tab first, then disconnect the facility cable. If you wish to detach 6 pin pcie, you do not have to press any buttons – simply pull the cable firmly and the facility can be lower off.
As soon as the facility cables are unplugged, you may transfer on to the subsequent step.
| Variety of Pins | Launch Tab |
|---|---|
| 8 | Sure |
| 6 | No |
Pull the Graphics Card Straight Up
As soon as the graphics card is disconnected, it needs to be lifted straight up and out of the growth slot. Use even stress on either side of the graphics card to keep away from bending or damaging it. It might be essential to wiggle the graphics card barely to loosen it earlier than pulling it straight up.
Watch out to not contact the gold contacts on the underside of the graphics card, as this might injury it. If the graphics card is caught, don’t power it. Strive wiggling it gently to loosen it, and if that does not work, seek the advice of the motherboard guide or a professional technician for help.
As soon as the graphics card is eliminated, examine it for any injury. If there’s any injury, don’t set up the graphics card in one other pc. Contact the producer of the graphics card for help.
Listed here are some further suggestions for pulling the graphics card straight up:
- Use a smooth material or anti-static mat to keep away from damaging the graphics card.
- Maintain the graphics card by the sides, not the center.
- Pull the graphics card straight up, don’t twist or bend it.
- If the graphics card is caught, don’t power it. Strive wiggling it gently to loosen it.
- If you’re not sure take away the graphics card, seek the advice of the motherboard guide or a professional technician for help.
- Energy down your pc and unplug it from the facility outlet.
- Open the case by eradicating the screws on the again.
- Find the graphics card. It is going to be an extended, skinny card with a fan on it.
- Disconnect the facility cables from the graphics card.
- Press down on the discharge tab on the finish of the graphics card slot.
- Pull the graphics card straight up and out of the slot.
- No show in your monitor
- Artifacts or different visible glitches in your display
- Your pc freezing or crashing
| Step | Description |
|---|---|
| 1. | Disconnect the facility cables from the graphics card. |
| 2. | Find the discharge lever on the growth slot. |
| 3. | Press the discharge lever to unlock the graphics card. |
| 4. | Grasp the graphics card by the sides. |
| 5. | Pull the graphics card straight up and out of the growth slot. |
| 6. | Examine the graphics card for any injury. |
| 7. | If there’s any injury, don’t set up the graphics card in one other pc. Contact the producer of the graphics card for help. |
Maintain the Graphics Card Securely
As soon as the cables are disconnected, firmly grasp the graphics card by its edges, being cautious to not contact the uncovered gold contacts on the PCIe connector or the backplate (if any).
Suggestions for Dealing with the Graphics Card:
| Suggestions |
|---|
| Keep away from touching the gold contacts on the PCIe connector. |
| Deal with the cardboard by the sides, not the center. |
| Watch out to not bend the cardboard. |
| If doable, use an anti-static wrist strap. |
With the graphics card securely in hand, gently pull it straight up and out of the PCIe slot. Don’t apply extreme power or tilt the cardboard, as this might injury the slot or the PCIe connector on the graphics card itself.
Insert into New System (for Set up)
1. Open the case
Step one is to open the case of your pc. That is normally completed by eradicating the screws that maintain the aspect panel in place. As soon as the aspect panel is eliminated, you should have entry to the within of your pc.
2. Find the PCIe slot
The subsequent step is to find the PCIe slot in your motherboard. That is normally an extended, slim slot that’s situated close to the highest of the motherboard. The PCIe slot can have a small steel latch on one finish.
3. Insert the graphics card
After you have situated the PCIe slot, you may insert the graphics card. To do that, first align the graphics card with the slot. Then, press down on the graphics card till it clicks into place. The steel latch will lock the graphics card in place.
4. Safe the graphics card
As soon as the graphics card is inserted, it’s good to safe it. That is normally completed by screwing in two screws which can be situated on the again of the graphics card. These screws will assist to maintain the graphics card in place and forestall it from coming free.
5. Shut the case
As soon as the graphics card is safe, you may shut the case of your pc. To do that, merely change the aspect panel and screw it again into place.
6. Set up drivers
As soon as the graphics card is put in, it’s good to set up the drivers. The drivers are software program that enables your pc to speak with the graphics card. You may normally obtain the drivers from the web site of the graphics card producer.
7. Restart your pc
As soon as the drivers are put in, it’s good to restart your pc. This can permit the modifications to take impact.
8. Take a look at the graphics card
As soon as your pc has restarted, you may take a look at the graphics card. To do that, you may run a graphics-intensive program or recreation. If the graphics card is working correctly, you will notice a major enchancment in graphics high quality.
9. Troubleshooting
If you’re having issues together with your graphics card, there are some things you are able to do:
| Drawback | Answer |
|---|---|
| No show | Guarantee that the graphics card is correctly seated within the PCIe slot. Additionally, guarantee that the facility provide is linked to the graphics card. |
| Poor efficiency | Guarantee that the drivers for the graphics card are put in. Additionally, attempt updating the BIOS of your motherboard. |
| Artifacts | Artifacts are visible distortions that may seem on the display when the graphics card is just not working correctly. If you happen to see artifacts, attempt reseating the graphics card within the PCIe slot. |
Reinstall Facet Panel and Energy On
10. **Reinstall the aspect panel.**
As soon as the graphics card is securely in place, it is time to reinstall the aspect panel. Guarantee that the aspect panel is correctly aligned and that every one the screws are tightened securely.
11. **Energy on the pc.**
As soon as the aspect panel is in place, you may energy on the pc. The pc ought to now boot up usually and the brand new graphics card needs to be detected routinely.
12. **Verify the machine supervisor.**
To confirm that the brand new graphics card is working correctly, you may verify the machine supervisor. In Home windows, you may open the machine supervisor by urgent the Home windows key + X and deciding on “System Supervisor.” Within the machine supervisor, develop the “Show adapters” part and confirm that your new graphics card is listed.
13. **Set up the drivers.**
After you have verified that the brand new graphics card is working correctly, it’s good to set up the drivers. The drivers in your graphics card can normally be discovered on the producer’s web site. Obtain the drivers and set up them in accordance with the producer’s directions.
14. **Restart the pc.**
As soon as the drivers are put in, it’s good to restart the pc. The pc ought to now boot up usually and the brand new graphics card needs to be totally practical.
How To Take A Graphics Card Out
Taking out a graphics card might look like a frightening activity, however it’s really fairly easy. Listed here are the steps on do it:
