Putting in a drain pipe in your washer can look like a frightening activity, however with a bit of preparation and steerage, you’ll be able to simply deal with this challenge your self. Whether or not you are organising a brand new washer or rerouting an present one, having a correct drainage system is important for making certain your laundry room operates effectively and with none nasty surprises.
On this complete information, we’ll break down your complete course of into easy-to-follow steps, offering you with the detailed directions and ideas you want. We’ll cowl the whole lot from gathering the required supplies to connecting the drain hose to your washer and securing it to the drainpipe. Alongside the way in which, we’ll emphasize security precautions and customary troubleshooting strategies as a way to set up your washer drainpipe with confidence.
Keep in mind, taking the time to put in a drain pipe accurately won’t solely forestall water injury and ugly odors in your laundry room but additionally make sure that your washer runs easily for years to return. So, let’s get began and delve into the world of DIY drain pipe set up!
Deciding on the Applicable Pipe and Fittings
Choosing the proper pipe and fittings is essential to make sure a long-lasting and environment friendly drain system in your washer. Listed below are some issues:
Diameter and Materials:
The pipe diameter ought to be 1-1/2 inches in diameter to accommodate the excessive quantity of water discharged from the washer. Frequent supplies for drain pipes embody:
- PVC (Polyvinyl Chloride): Sturdy, light-weight, and proof against most chemical substances.
- ABS (Acrylonitrile Butadiene Styrene): Just like PVC however barely extra versatile and heat-resistant.
- CPVC (Chlorinated Polyvinyl Chloride): Utilized in scorching water functions on account of its greater temperature tolerance.
Fittings:
Important fittings embody:
- Elbows: Join pipes at angles to alter their path.
- Tee Fittings: Create connections between a number of pipes.
- Couplings: Be part of straight pipe sections.
- Reducers: Transition pipes to attach completely different diameters.
Entice:
The lure is a U-shaped becoming put in on the base of the drain to stop sewer gases from escaping into the home. Traps with an simply detachable cleanout plug are really useful for upkeep.
| Diameter of Drain Pipe: 1-1/2 inches |
| Frequent Drain Pipe Supplies: PVC, ABS, CPVC |
| Important Fittings: Elbows, Tee Fittings, Couplings, Reducers, Entice |
Making ready the Discharge Level
### Select the Location
Choose an appropriate location for the discharge level, making certain it is accessible and inside attain of the washer’s drain hose. Take into account the gap, slope, and obstacles between the machine and the discharge level.
### Decide the Discharge Technique
Determine the tactic of discharge, both on to a drainpipe, flooring drain, or out of doors drain. If connecting to a drainpipe, guarantee its diameter is massive sufficient to accommodate the drain hose. For flooring drains, make sure the drain is correctly sealed to stop leaks.
### Create a Slope
Create a slight downward slope from the washer to the discharge level. This slope will permit water to empty freely and forestall backflow into the machine. The slope ought to be roughly 1/4 inch per foot.
### Safe the Drainpipe
If related to a drainpipe, safe the washer’s drain hose to the drainpipe utilizing a hose clamp or zip tie. Make sure the connection is tight and leak-proof.
Further Ideas
* Use a drain lure to stop odors from escaping into the room.
* If putting in an out of doors drain, guarantee it complies with native constructing codes and rules.
* Think about using a standpipe to raise the discharge level and enhance drainage.
Chopping and Assembling the Drain Pipe
To successfully join your washer to the drainage system, the drain pipe should be minimize and assembled precisely. This is an in depth information to make sure a safe and environment friendly connection:
Supplies you may want:
- Drain hose for the washer
- Clamps or hose clamps
- Teflon tape or plumber’s putty
- Measuring tape or ruler
- Sharp utility knife or scissors
Steps:
1. Measure and Lower the Drain Pipe: Decide the suitable size of the drain hose by measuring the gap between the washer’s drain outlet and the drain pipe. Mark the measurement on the hose utilizing a measuring tape or ruler. Rigorously minimize the hose on the marked level utilizing a pointy utility knife or scissors.
2. Apply Teflon Tape or Plumber’s Putty: For a safe and watertight connection, apply Teflon tape or plumber’s putty to the threads of the drain pipe’s becoming. Wrap the tape or putty tightly and evenly across the threads to create a seal.
3. Assemble the Drain Pipe: Join the drain hose to the drain pipe’s becoming by hand-tightening it. Be sure that the hose is totally inserted and the connection is cosy. Use a wrench to additional tighten the connection, however don’t overtighten. Safe the reference to a clamp or hose clamp to stop it from coming free.
Attaching the Drain Hose to the Washing Machine
1. Find the drain hose that got here along with your washer. It’s often a
versatile, corrugated hose that’s about 6 ft lengthy and has a diameter of 1 to 1.5
inches.
2. Slide the clamp onto the drain hose, about 6 inches from the tip. The clamp
ought to be tight sufficient to carry the hose in place, however not so tight that it crimps the
hose.
3. Connect the drain hose to the drain outlet on the again of the washer.
The drain outlet is often a plastic or metallic pipe that’s positioned close to the underside
of the machine.
4. Tighten the clamp to safe the drain hose to the drain outlet. Make it possible for the
hose will not be kinked or twisted.
| Step | Description | Picture |
|---|---|---|
| 1 | Find the drain hose that got here along with your washer. |  |
| 2 | Slide the clamp onto the drain hose, about 6 inches from the tip. |  |
| 3 | Connect the drain hose to the drain outlet on the again of the washer. |  |
| 4 | Tighten the clamp to safe the drain hose to the drain outlet. |  |
Routing the Drain Pipe to the Discharge Level
After getting chosen an appropriate discharge level, you might want to route the drain pipe accordingly. This is find out how to do it:
1. Measure and Lower the Drain Pipe
Decide the size of the drain pipe wanted and minimize it to dimension utilizing a hacksaw or pipe cutter.
2. Connect the Drain Hose to the Washing Machine
Join the drain hose to the drain pump outlet on the washer. Safe it with the offered hose clamp.
3. Determine on the Discharge Technique
Decide if you wish to discharge the wastewater straight right into a drain pipe or use a standpipe.
4. Join the Drain Pipe to the Discharge Level
If utilizing a drain pipe, insert the drain hose into the pipe and safe it with a hose clamp. If utilizing a standpipe, set up the standpipe and join the drain hose to it.
5. Make the most of a Drainage Sump Pump
In instances the place the discharge level is positioned beneath the washer, a drainage sump pump could also be required. Set up the pump and join the drain hose to it. The pump will elevate the wastewater and discharge it into the specified location.
| Discharge Technique | Particulars |
|---|---|
| Direct Drain | Connects the drain hose on to a drain pipe. |
| Standpipe | Installs a standpipe and connects the drain hose to it. Used when the discharge level is greater than the washer. |
| Drainage Sump Pump | Utilized when the discharge level is beneath the washer. The pump lifts the wastewater and discharges it. |
Testing for Leaks and Performance
1. Water Provide Check
With the drain hose related, activate the water provide to the washer and permit it to fill with water. Test for leaks across the drain hose connection level and the water provide traces.
2. Drain Cycle Check
Place a bucket or empty container underneath the drain hose and begin a drain cycle with none garments within the machine. The water ought to drain into the container with none leaks or blockages.
3. Washing Cycle Check
Run a brief washing cycle with a small load of garments. Observe the drain hose and make sure that the water drains easily and doesn’t leak. If the water backs up or drains slowly, there could also be a blockage within the drain hose or plumbing system.
4. Rinse Cycle Check
After the washing cycle, begin a rinse cycle and examine for leaks. The rinse cycle includes draining and refilling the machine with clear water.
5. Spin Cycle Check
Begin a spin cycle to check the drain hose’s potential to deal with a excessive quantity of water. Observe the hose for leaks or extreme vibration.
6. Detergent and Material Softener Check
Add a small quantity of detergent and cloth softener to the machine and run a brief cycle. Test for any leaks across the detergent dispenser or the drain hose connection level.
7. Prolonged Interval of Use
After conducting the preliminary checks, monitor the washer for a couple of days to make sure that there are not any hidden leaks or drainage points. Run a number of several types of cycles with various masses to check the system’s total performance and sturdiness.
Putting in a Drain Entice (Optionally available)
Putting in a drain lure is important to stop sewer gases and odors from coming into your property. It acts as a barrier, trapping water and making a seal that retains dangerous gases out. This is find out how to do it:
1. Measure and minimize the drainpipe to the specified size.
2. Insert the rubber grommet into the drain outlet of the washer.
3. Slide the hose clamp over the tip of the drainpipe and tighten it onto the grommet.
4. Join the opposite finish of the drainpipe to the drain lure.
5. Tighten the hose clamp onto the drain lure to safe the connection.
6. Run a bead of sealant across the base of the drain lure to create a watertight seal.
7. Safe the drain lure to the wall or flooring utilizing screws or brackets.
8. Place the U-shaped drain lure accurately. The underside portion of the lure ought to be crammed with water to create a seal, so ensure the lure will not be tilted or greater than the drain outlet of the washer. The lure will need to have sufficient slope to permit water to stream freely.
– Test for correct drainage: Activate the washer and observe if the water drains easily by way of the lure. Modify the place of the lure if essential.
– Recurrently clear the drain lure: Over time, hair, cleaning soap scum, and different particles can accumulate within the lure, blocking water stream. To forestall this, unscrew the cleanout plug positioned on the underside of the lure and take away any accrued particles.
Connecting the Drain Pipe to the Drain System
As soon as the drain pipe is related to the washer, it must be related to the drain system. This may be carried out by connecting the drain pipe to a drain hose or a standpipe.
To attach the drain pipe to a drain hose, the hose ought to be connected to the tip of the drain pipe. The hose ought to then be routed to a close-by drain, reminiscent of a sink drain or a flooring drain. The hose ought to be secured in order that it doesn’t come free and leak.
To attach the drain pipe to a standpipe, the standpipe ought to be put in subsequent to the washer. The drain pipe ought to then be related to the standpipe utilizing a rubber washer. The washer ought to be positioned between the drain pipe and the standpipe to stop leaks.
As soon as the drain pipe is related to the drain system, the washer may be examined to make sure that the water is draining correctly. To check the washer, run a cycle with no garments within the machine. The water ought to drain out of the machine and into the drain system with none leaks.
Drain Pipe Connection Choices
When connecting a washer drain pipe to a drain, you’ll usually have two choices: a drain hose or a standpipe.
| Drain Hose | Standpipe |
|---|---|
| Connects on to the drain pipe | Requires set up subsequent to the washer |
| Simple to put in | Safer connection |
| Can be utilized for non permanent or everlasting installations | Usually used for everlasting installations |
How To Set up A Drain Pipe For Washing Machine
Putting in a drain pipe for a washer will not be troublesome, nevertheless it does require some fundamental instruments and data of plumbing. In case you are not comfy working with plumbing, it’s best to name a certified plumber for help.
To put in a drain pipe for a washer, you’ll need the next supplies:
- A size of PVC pipe (1 1/2 inches in diameter)
- A PVC pipe cutter
- A PVC glue
- A drain hose from the washer
- A clamp or hose clamp to safe the drain hose to the drain pipe
After getting gathered your supplies, you’ll be able to start the set up course of.
- First, minimize the PVC pipe to the specified size. The size of the pipe will rely upon the situation of the drain and the washer.
- Subsequent, apply PVC glue to the tip of the pipe and insert the drain hose into the pipe.
- Safe the drain hose to the drain pipe with a clamp or hose clamp.
- Lastly, join the opposite finish of the PVC pipe to the drain.
As soon as the drain pipe is put in, you’ll be able to check the washer to be sure that it’s draining correctly.
Individuals Additionally Ask
How do I do know if my washer drain pipe is clogged?
There are a couple of indicators which will point out that your washer drain pipe is clogged. These embody:
- Water backing up into the washer
- Water leaking from the drain pipe
- A sluggish draining washer
How do I unclog a washer drain pipe?
There are a couple of other ways to unclog a washer drain pipe. You’ll be able to attempt utilizing a drain snake, a chemical drain cleaner, or a plunger.
Can I set up a washer drain pipe myself?
Sure, you’ll be able to set up a washer drain pipe your self when you’ve got some fundamental plumbing data. Nevertheless, in case you are not comfy working with plumbing, it’s best to name a certified plumber for help.
