Altering the PUR water filter is an easy and important process that ensures you might have entry to scrub, contemporary water. Neglecting to interchange the filter recurrently can result in a build-up of contaminants and micro organism, compromising the standard of your consuming water. This complete information will give you step-by-step directions and useful tricks to make the filter alternative course of fast and easy.
Earlier than you start, collect the mandatory supplies: a brand new PUR water filter cartridge, a fabric or towel to soak up any spills, and a wrench or filter cap software if required. Find the water filter housing, which is often located underneath the sink or behind the fridge. Flip off the water provide valve to the filter housing and open the tap to launch any remaining water strain. Rigorously unscrew the filter housing, which can require the usage of the wrench or filter cap software.
As soon as the filter housing is open, take away the previous filter cartridge and discard it. Take the brand new filter cartridge and take away the protecting packaging. Align the brand new cartridge with the housing and insert it firmly, making certain it’s correctly seated. Hand-tighten the filter housing again into place, and don’t overtighten. Flip the water provide valve again on and run water via the filter for a couple of minutes to flush out any air bubbles or unfastened carbon particles. Lastly, examine for any leaks across the filter housing and benefit from the peace of thoughts that comes with realizing your water is filtered and protected to drink.
Establish the Location of the Water Filter
Figuring out the situation of your Pur water filter is crucial for changing it promptly and making certain optimum water high quality. Here is an in depth information that will help you find the filter in numerous setup situations:
Faucet-Mounted Filters
Faucet-mounted filters are usually connected on to the tap’s aerator, the place water flows out. Search for a cylindrical or rectangular housing linked to the tap’s base. The housing often has a button or lever that permits you to detach the filter for alternative.
Countertop Filters
Countertop filters are standalone models that sit in your kitchen counter and hook up with your sink through a devoted spout or adapter. The filter housing is often positioned close to the highest of the unit. Search for a deal with or knob that permits you to take away the housing and entry the filter inside.
Below-Sink Filters
Below-sink filters are put in beneath your kitchen sink and join on to your water provide line. The filter housing is often positioned close to the water inlet valve. Observe the water line linked to the tap to find the under-sink filter housing.
Fridge Filters
Fridge filters are usually positioned contained in the fridge compartment. Search for a small, detachable housing close to the water dispenser or ice maker. Some fashions require you to take away a grille or panel to entry the filter housing.
| Filter Sort | Typical Location |
|---|---|
| Faucet-Mounted | Hooked up to faucet aerator |
| Countertop | Prime of the unit |
| Below-Sink | Close to water inlet valve |
| Fridge | Inside fridge compartment |
Collect Essential Instruments and Supplies
To make sure a easy filter alternative course of, collect the next gear and supplies forward of time:
Instruments:
- Adjustable wrench or pliers
- Bucket or giant bowl
- Paper towels or cleansing cloths
Supplies:
- New PUR water filter
- Distilled water or white vinegar (non-obligatory)
- Substitute O-rings (if relevant)
| Sort of PUR Filter | Substitute O-rings Required |
|---|---|
| Normal PUR Filters (e.g., PUR Basic, PUR Fundamental) | No |
| PUR Faucet Mount Filters | Sure |
Moreover, if the filter has been in use for an prolonged interval, contemplate having a flashlight or headlamp helpful to light up the set up space.
Flip Off the Water Provide
Earlier than you start altering the Pur water filter, it’s essential to show off the water provide to forestall leaks and potential water injury. Find the water provide valve, which is often located underneath the sink or behind the fridge. The valve can have a deal with or knob that you could flip clockwise to close off the water circulation. As soon as the water provide is turned off, you may proceed to the following step of changing the water filter.
Discovering the Water Provide Valve
The water provide valve is often positioned in one of many following locations:
- Below the sink, behind the cupboard door.
- Behind the fridge, accessible by eradicating the kickplate.
- In a crawlspace or basement, close to the primary water provide line.
Sorts of Water Provide Valves
There are two widespread varieties of water provide valves:
| Sort | Description |
|---|---|
| Gate Valve | Has a spherical deal with and requires a number of turns to open or shut utterly. |
| Ball Valve | Has a lever deal with and could be turned rapidly from open to closed place. |
Launch Water Strain
To launch the water strain from the tap, comply with these steps:
1. Flip Off the Water Provide
Find the water provide valve underneath the sink and switch it clockwise to shut it. This can cease the circulation of water to the tap.
2. Open the Faucet
Activate the chilly water faucet and let the remaining water drain out. This can assist to cut back the strain within the line and make it simpler to take away the filter.
3. Shut the Faucet
As soon as the water has stopped flowing, shut the tap.
4. Disconnect the Water Line
Utilizing a wrench, rigorously disconnect the water line from the tap. Water should drip out of the road, so have a towel or bucket able to catch it.
| Pipe Sort | Instrument Required |
|---|---|
| Copper | Adjustable wrench |
| PEX | PEX disconnect software |
| CPVC | CPVC cutter |
Take away the Previous Filter Housing
To take away the previous filter cartridge and housing out of your PUR faucet air purifier, comply with these steps:
- Shut off the water provide to the tap. That is usually completed by turning the valve underneath the sink.
- Launch the strain within the filter housing. To do that, press the strain launch button on the highest of the housing.
- Unscrew the filter housing. Use your palms or a wrench to show the housing counterclockwise till it loosens.
- Pull the filter cartridge out of the housing. The cartridge can be barely damp, so watch out when dealing with it.
- Examine the previous filter cartridge. Search for any indicators of injury or deterioration. If the cartridge is broken, it ought to be changed instantly.
Desk: Sorts of PUR Faucet Purifiers and Their Filter Cartridge Numbers
Air purifier Mannequin Filter Cartridge Quantity PFM1000B RFC1000 PFM2000B RFC2000 PFM3000B RFC3000 PFM4000B RFC4000 PFM5000B RFC5000 Examine the Filter Housing for Leaks
Step 6: Look at the O-Rings for Injury
After loosening the pinnacle, rigorously examine the O-rings on the pinnacle and housing for any indicators of injury, similar to cuts, tears, or cracks. These O-rings create a watertight seal between the elements, and any injury can compromise the filter’s integrity and result in leaks.
Process:
1. Take away the pinnacle from the housing.
2. Rigorously look at each O-rings for any seen injury.
3. If injury is current, substitute the O-rings with new ones of the identical dimension and materials.
4. Apply a skinny layer of food-grade silicone grease to the O-rings to enhance their sealing capability.O-Ring Location Dimension Materials Head [Insert Size] [Insert Material] Housing [Insert Size] [Insert Material] Observe: O-rings could differ in dimension and materials relying on the particular Pur water filter mannequin. Seek advice from the producer’s directions or seek the advice of the desk supplied for correct info.
Insert the New Filter
After eradicating the previous filter, you are able to insert the brand new one. Here is how:
1.
Unpack the brand new filter and ensure it is the correct dimension and sort in your PUR system.
2.
Find the filter housing on the PUR system. It is often a cylindrical or rectangular-shaped compartment on the entrance or facet of the system.
3.
Align the brand new filter with the housing. There could also be a notch or information contained in the housing that will help you place the filter appropriately.
4.
Push the filter into the housing till it clicks or snaps into place. You could want to use some strain to make sure it is securely seated.
5.
Tighten the housing, if crucial. Some PUR methods have a locking mechanism or threaded cap that must be tightened to safe the filter housing.
6.
Activate the water provide and permit the system to run for a couple of minutes to purge any air from the traces.
7.
Examine for leaks. Examine the filter housing and all connections to make sure there aren’t any leaks. In the event you discover a leak, tighten the housing or connections additional.
Tip: It is a good suggestion to flush the system with chilly water for a couple of minutes earlier than utilizing it to make sure any residual carbon or particles is eliminated.
Tighten the Filter Housing
8. **Tighten the Filter Housing:**
As soon as the filter cartridge is in place, it is time to tighten the filter housing again collectively. Here is a step-by-step information:
Step 1: Align the filter housing cap with the bottom. Make certain the alignment marks or notches match. Step 2: Tighten the cap by hand as a lot as attainable. Step 3: Use the filter wrench or pliers to additional tighten the cap. Keep away from overtightening, as this may injury the housing. Step 4: Tighten the cap till it is cosy however not overly tight. Intention for 1 / 4 to half flip after hand-tightening. Step 5: Examine for leaks by operating water via the filter system and inspecting for any drips or seepage. As soon as the housing is tightened, your PUR water filter is able to use. Get pleasure from clear, filtered water out of your faucet!
Flip On the Water Provide
As soon as the previous filter has been eliminated, it’s time to activate the water provide. This may be completed by turning the water valve beneath the sink clockwise. As soon as the water is turned on, permit it to run via the system for a couple of minutes to flush out any remaining sediment or particles. Then, flip the water off and substitute the brand new filter. Observe: When you’ve got a reverse osmosis system, you’ll need to flush the membrane for about half-hour earlier than utilizing it.
The next desk outlines the steps to activate the water provide:
Step Description 1 Flip the water valve beneath the sink clockwise. 2 Enable the water to run via the system for a couple of minutes. 3 Flip the water off and substitute the brand new filter. As soon as the brand new filter is in place, flip the water again on and permit it to run for a couple of extra minutes. This can assist to prime the filter and take away any air bubbles from the system. Now you can take pleasure in contemporary, filtered water out of your PUR water filter.
Examine if Your Filter Must be Modified
Most filters can have a built-in indicator that reveals when it’s time to change the filter. In case you are undecided in case your filter must be modified, examine the producer’s directions.
Find the Filter
Relying in your fridge mannequin, the filter could also be positioned in numerous locations. It could be within the fridge behind the crisper, contained in the door, or behind the grille on the backside of the fridge.
Flip Off the Water Provide
Earlier than you substitute the filter, shut off the water provide to the fridge. You possibly can often do that by turning off the valve underneath the sink.
Take away the Previous Filter
Twist the previous filter counterclockwise to take away it.
Set up the New Filter
Align the brand new filter with the housing and twist it clockwise to tighten it.
Flip On the Water Provide
As soon as the filter is put in, flip again on the water provide.
Flush the System
Earlier than consuming the water, flush the system by operating chilly water via the dispenser for five minutes or till the water runs clear.
Reset the Filter Life Indicator (if relevant)
- Press and maintain the “Filter Reset” button for five seconds.
- The “Filter Reset” mild will flip off, indicating that the filter life indicator has been reset.
- Eliminate the previous filter in keeping with the producer’s directions.
Tips on how to Change the PUR Water Filter
Altering the PUR water filter is an easy course of that may be accomplished in only a few minutes. Listed here are the steps you could comply with:
- Flip off the water provide to the filter.
- Unscrew the previous filter from the filter head.
- Screw on the brand new filter.
- Activate the water provide and examine for leaks.
- Flush the filter for five minutes earlier than utilizing it.
Individuals Additionally Ask
How usually ought to I modify my PUR water filter?
You must change your PUR water filter each 3-6 months, or sooner in case you discover a lower in water circulation or a change in style or odor.
What kind of water filter do I would like for my PUR water pitcher?
PUR water pitchers use quite a lot of totally different filter sorts, relying on the mannequin. You will discover the kind of filter you want in your pitcher by wanting on the backside of the pitcher or by checking the PUR web site.
How do I reset my PUR water filter indicator?
To reset your PUR water filter indicator, press and maintain the reset button for five seconds. The indicator mild will flip off, indicating that the filter has been reset.
