Think about the comfort of effortlessly sliding your Ford seat backwards and forwards to accommodate totally different drivers or cargo wants. Putting in an additional Ford seat L observe can rework your automobile right into a haven of customizable consolation and flexibility. This complete information will empower you with step-by-step directions, guaranteeing a seamless and profitable set up. Whether or not you are a seasoned mechanic or an adventurous DIY fanatic, put together to reinforce your driving expertise with this beneficial improve. Embark on this journey to unlock the complete potential of your Ford seat’s mobility and personalization.
Earlier than delving into the set up course of, let’s collect the important instruments and supplies. You may want a set of metric wrenches, a socket set, a drill, drill bits, self-tapping screws, and naturally, the additional Ford seat L observe. Along with your arsenal of sources prepared, you may proceed with confidence. Step one includes eradicating the prevailing seat out of your automobile. Fastidiously disconnect the wiring harness and unbolt the seat from its mounting factors. As soon as the seat is eliminated, you will have clear entry to the world the place the additional L observe will likely be put in.
Now comes the exact set up of the additional Ford seat L observe. Place the L observe onto the seat base and align it precisely with the prevailing observe. Safe the L observe firmly utilizing the supplied self-tapping screws. Make sure the screws are adequately tightened to stop any motion or rattling throughout use. As soon as the L observe is securely fixed, rigorously reinstall the seat into your automobile. Reconnect the wiring harness and bolt the seat again into its unique place. With these steps meticulously adopted, you’ve got efficiently put in the additional Ford seat L observe, increasing the vary of seat changes and elevating your driving consolation to new heights.
Finding the Current L Observe
To start, find the prevailing L observe in your Ford automobile. That is the observe that the seat rails slide backwards and forwards on. It’s usually positioned beneath the seat, and it could be lined by a plastic or steel trim panel. If you’re having hassle discovering the L observe, seek the advice of your automobile’s proprietor’s handbook or seek for diagrams on-line.
After getting positioned the prevailing L observe, you will want to find out how a lot extra observe you want to set up. This may rely on the kind of seat you might be putting in and the quantity of adjustment you need. Typically talking, you will want so as to add at the least 12 inches of observe to every facet of the seat.
Here’s a desk of measurements and options for a way a lot extra L observe you might want:
| Seat Kind | Extra L Observe Wanted |
|---|---|
| Commonplace bench seat | 12 inches per facet |
| Bucket seat | 18 inches per facet |
| Racing seat | 24 inches per facet |
After getting decided how a lot extra observe you want, you should buy the suitable observe on-line or out of your native auto components retailer.Assembling the Further L Observe
Step 1: Collect Supplies
You have to the next supplies:
- Further L observe
- L observe mounting bolts
- Socket wrench
Step 2: Put together the L Observe
Measure and mark the places for the mounting bolts on the L observe. Drill pilot holes for the bolts utilizing a drill bit that’s barely smaller than the bolts.
Step 3: Set up the Mounting Bolts
Insert the mounting bolts into the pilot holes and tighten them utilizing the socket wrench. Make sure that the bolts are tightened securely, however don’t overtighten them.
| Tightening Torque | Bolt Measurement |
|---|---|
| 10-12 ft-lbs | 1/4-20 bolts |
| 15-18 ft-lbs | 5/16-18 bolts |
| 20-25 ft-lbs | 3/8-16 bolts |
Step 4: Connect the L Observe to the Car
Align the L observe with the mounting holes on the automobile. Insert the mounting bolts into the holes and tighten them utilizing the socket wrench. Make sure that the L observe is securely connected.
Aligning and Attaching the L Observe
As soon as the L observe is reduce to the proper size, you will need to align it correctly earlier than attaching it to the ground. Use the next steps to make sure correct alignment:
- Place the L observe on the ground alongside the specified alignment.
- Verify for alignment utilizing a measuring tape or straightedge to make sure it’s parallel to the automobile’s body.
- Mark the situation of the mounting holes utilizing a pencil or marker.
For safe attachment, use the next process:
- Drill pilot holes on the marked places utilizing a drill bit that’s barely smaller than the diameter of the mounting bolts.
- Align the L observe with the pilot holes and insert the mounting bolts.
- Tighten the bolts utilizing a wrench or socket, guaranteeing they’re securely fixed.
| Materials | Amount | Size |
|---|---|---|
| L Observe | 2 | As per automobile necessities |
| Mounting Bolts | 8-10 (per L observe) | 1/2 inch |
| Drill Bit | 1 | 1/4 inch |
| Measuring Tape | 1 | N/A |
| Wrench or Socket | 1 | N/A |
Tightening the Carriage Bolts
That is the ultimate step within the set up course of. As soon as the bolts are tightened, the seat will likely be securely fixed to the L-track. To tighten the bolts, you will want a socket wrench or a field wrench. Begin by tightening the bolts finger-tight. As soon as the bolts are finger-tight, use the wrench to tighten them additional. Watch out to not overtighten the bolts, as this will injury the threads.
Here’s a desk summarizing the steps for tightening the carriage bolts:
| Step | Directions |
|---|---|
| 1 | Tighten the bolts finger-tight. |
| 2 | Use a wrench to tighten the bolts additional. |
| 3 | Watch out to not overtighten the bolts. |
Reinforcing the L Observe
Reinforcing the L observe is a necessary step to make sure the soundness and sturdiness of your aftermarket seat set up. This is an in depth information that will help you reinforce the L observe:
Supplies Required
| Element | Amount |
|---|---|
| 1/4″ x 1″ Metal Flat Bar | 2 |
| 1/4″ Bolts | 8 |
| Washers | 8 |
| Nuts | 8 |
Process
- Find Reinforcement Factors: Discover the prevailing weld nuts or mounting factors on the automobile’s ground the place the unique seat observe was connected. These factors will function the reinforcement factors.
- Measure and Minimize Flat Bars: Minimize two items of 1/4" x 1" metal flat bar to a size that corresponds to the within width of the automobile’s ground.
- Place Flat Bars: Place the flat bars alongside the within fringe of the ground, parallel to the prevailing L observe. Make sure that they align with the reinforcement factors.
- Safe Flat Bars: Utilizing 1/4" bolts, washers, and nuts, bolt the flat bars to the reinforcement factors. Tighten the bolts securely.
- Connect to L Observe: Place the L observe over the flat bars and safe it utilizing bolts, washers, and nuts. Tighten the bolts to the beneficial torque specs.
- Extra Issues: In sure circumstances, reminiscent of for heavy-duty purposes or for putting in aftermarket seats with a big weight capability, you might want so as to add extra assist by welding the flat bars to the automobile’s ground. Seek the advice of with a certified automotive skilled for correct welding directions.
Putting in the Seat on the L Observe
As soon as the L observe is put in, you may start putting in the seat. To do that, you will want to:
- Align the seat with the L observe. Guarantee that the seat is going through the proper path and that the entrance of the seat is aligned with the entrance of the L observe.
- Raise the seat onto the L observe. Fastidiously carry the seat onto the L observe and ensure that it’s securely seated.
- Slide the seat ahead and backward. Slide the seat ahead and backward to ensure that it strikes easily alongside the L observe.
- Tighten the seat bolts. Tighten the seat bolts to safe the seat to the L observe.
- Reinstall the seat covers. Reinstall the seat covers to cowl the seat bolts and provides the seat a completed look.
6. Regulate the Seat Place
As soon as the seat is put in, you may regulate the seat place to your liking. To do that, you should utilize the seat adjustment levers to maneuver the seat ahead and backward, up and down, and tilt the seatback.
7. Set up the Seat {Hardware}
The ultimate step is to put in the seat {hardware}. This contains putting in the seat belt buckles, the seat belt retractors, and the seat belt anchors. The seat {hardware} is usually included with the seat, however you might must buy it individually if you’re putting in an aftermarket seat.
Putting in the Seat Belt Buckles
To put in the seat belt buckles, you will want to:
Putting in the Seat Belt Retractors
To put in the seat belt retractors, you will want to:
Adjusting the Seat Place
To regulate the seat place, observe these steps:
- Find the seat adjustment levers. These are often positioned on the facet of the seat.
- Pull the lever ahead to maneuver the seat ahead.
- Push the lever again to maneuver the seat again.
- Increase or decrease the seat cushion. To do that, pull up on the lever positioned on the entrance of the seat cushion.
- Tilt the seatback ahead or backward. To do that, pull up on the lever positioned on the rear of the seatback.
- Regulate the lumbar assist. To do that, flip the knob positioned on the facet of the seat.
- Regulate the headrest. To do that, pull up on the lever positioned on the high of the headrest.
- Save your seat place. To do that, press the “M” button on the seat adjustment panel.
Here’s a desk that summarizes the seat adjustment options:
| Characteristic | Easy methods to Regulate |
|---|---|
| Transfer seat ahead | Pull lever ahead |
| Transfer seat again | Push lever again |
| Increase or decrease seat cushion | Pull up on lever at entrance of seat cushion |
| Tilt seatback ahead or backward | Pull up on lever at rear of seatback |
| Regulate lumbar assist | Flip knob on facet of seat |
| Regulate headrest | Pull up on lever at high of headrest |
| Save seat place | Press “M” button on seat adjustment panel |
Security Precautions
Earlier than embarking on the set up course of, it’s crucial to prioritize security by adhering to the next precautions:
- Put on Protecting Gear: Don security glasses, gloves, and closed-toe footwear to reduce the chance of damage.
- Disconnect the Battery: Disconnect the damaging terminal of your battery to stop electrical hazards throughout the set up.
- Park on a Degree Floor: Park your automobile on a flat, steady floor to make sure it stays stationary all through the method.
- Assist the Seat: Make the most of a jack stand or different appropriate assist to stop the seat from falling whereas disconnected.
- Use Correct Instruments: Make use of the suitable instruments for every process, together with a socket wrench, torque wrench, and drill.
- Comply with Directions Fastidiously: Check with the producer’s directions or a good on-line information to make sure correct set up.
- Verify Tightness Often: As soon as put in, periodically examine the tightness of all bolts and screws to take care of security.
- Safe L Observe: Make sure the L observe is securely connected to the ground or brackets utilizing the desired bolts and torque settings.
- Reattach Seat: Fastidiously reattach the seat to the L observe, guaranteeing it slides easily and locks into place securely.
9. Verify Alignment and Tighten Bolts
Examine the alignment of the newly put in L observe to make sure it’s parallel to the prevailing observe. Use a measuring tape or ruler to confirm the distances and angles. Tighten all bolts and screws to the desired torque values utilizing a torque wrench. This step ensures the L observe stays firmly in place and the seat might be adjusted easily and safely.
Troubleshooting Widespread Points
In case you encounter any points whereas putting in the additional Ford seat L observe, examine the next troubleshooting steps:
1. Observe Alignment
Make sure that the brand new L observe is correctly aligned with the prevailing one. Misalignment can forestall the seats from sliding easily.
2. Bolt Tightening
Confirm that every one bolts are securely tightened. Free bolts could cause rattling and instability.
3. Particles Elimination
Examine the observe for any particles or grime. Clear it totally to stop interference with seat motion.
4. Seat Compatibility
Verify that the seats you plan to make use of are suitable with the L observe system. Incompatible seats might not match accurately.
5. Rail Extension
If you want to prolong the observe size, use suitable rail extension brackets. Improper extension can weaken the observe energy.
6. Lubrication
Apply a skinny layer of lubricant to the observe to scale back friction and enhance seat sliding.
7. Wiring Obstructions
Make sure that there aren’t any wiring harnesses or cables obstructing the observe path. Keep away from injury throughout set up.
8. Security Precautions
At all times put on security glasses and gloves. Use correct lifting methods to keep away from damage.
9. Device Necessities
Have all needed instruments out there, together with a socket wrench, drill, and applicable fasteners.
10. Search Skilled Help
In case you encounter any persistent points or have any considerations, don’t hesitate to hunt skilled help from an skilled mechanic.
How To Set up Further Ford Seat L Observe
To put in additional Ford seat L observe, you will want the next instruments and supplies:
- Socket wrench
- 10mm socket
- 13mm socket
- 15mm socket
- 18mm socket
- T40 Torx bit
- Flathead screwdriver
- Phillips head screwdriver
- New seat L observe
- Bolts (4x M10x1.5, 4x M12x1.75, 4x M14x2.0)
- Washers (4x M10, 4x M12, 4x M14)
- Lock nuts (4x M10, 4x M12, 4x M14)
After getting gathered the entire needed instruments and supplies, you may observe these steps to put in the brand new seat L observe:
1. Take away the previous seat L observe. To do that, you will want to take away the 4 bolts that safe the seat L observe to the seat body. As soon as the bolts are eliminated, you may carry the seat L observe off of the seat body.
2. Clear the seat body. As soon as the previous seat L observe is eliminated, you will want to wash the seat body. This may assist to make sure that the brand new seat L observe is put in correctly.
3. Set up the brand new seat L observe. To do that, you will want to position the brand new seat L observe on the seat body. Guarantee that the brand new seat L observe is aligned correctly.
4. Safe the brand new seat L observe. As soon as the brand new seat L observe is aligned correctly, you will want to safe it to the seat body. To do that, you will want to insert the 4 bolts into the holes within the seat L observe and tighten them till they’re comfortable.
5. Check the brand new seat L observe. As soon as the brand new seat L observe is put in, you will want to check it to ensure that it’s working correctly. To do that, you will want to take a seat within the seat and transfer the seat backwards and forwards. The seat ought to transfer easily and simply.
Folks Additionally Ask
What’s a seat L observe?
A seat L observe is a steel observe that’s mounted to the seat body. The seat L observe permits the seat to maneuver backwards and forwards.
How do I do know if I want to switch my seat L observe?
In case your seat isn’t transferring easily or simply, it could be needed to switch the seat L observe.
How a lot does it value to switch a seat L observe?
The price to switch a seat L observe will range relying on the make and mannequin of your automobile. Nonetheless, you may count on to pay between $100 and $300 for the components and labor.
