If you’re planning on buying a case to your iPad, you will need to know the proper measurement. The identical goes should you simply wish to know the mannequin of your iPad. There are a couple of alternative ways to measure the dimensions of your iPad, relying on whether or not you might have the system readily available or not. On this article, we are going to give you step-by-step directions on measure the dimensions of your iPad, whatever the mannequin.
When you have your iPad readily available, the simplest solution to measure the dimensions is to make use of a ruler or measuring tape. Measure the size and width of the iPad, from edge to edge. The size is the measurement from the highest to the underside of the iPad, whereas the width is the measurement backward and forward. After getting the size and width, you should utilize the next desk to find out the dimensions of your iPad:
Size (in) | Width (in) | Measurement |
---|---|---|
9.7 | 7.0 | 9.7-inch iPad |
10.2 | 7.5 | 10.2-inch iPad (seventh and eighth technology) |
10.5 | 7.9 | 10.5-inch iPad Professional |
11.0 | 8.1 | 11-inch iPad Professional (1st, 2nd, and third technology) |
12.9 | 8.7 | 12.9-inch iPad Professional (1st, 2nd, third, 4th, and fifth technology) |
Measuring the Bodily Dimensions
Earlier than discussing the technical dimensions of an iPad, it is important to grasp the bodily measurements. These dimensions immediately affect the system’s portability, consolation of use, and compatibility with equipment. This is an in depth information on measuring the bodily dimensions of an iPad.
1. Size and Width
To measure the size and width of the iPad, you will want a ruler or measuring tape. Place the ruler alongside the system’s longest aspect, from one edge to the opposite. File the measurement in inches or centimeters. Repeat the method for the width, which is the shorter aspect perpendicular to the size. The size usually corresponds to the peak of the iPad when held in portrait mode, whereas the width corresponds to the width in portrait mode or the peak in panorama mode.
2. Top
The peak of an iPad is measured by inserting the system on a flat floor with the display screen dealing with up. Use a ruler or measuring tape to measure from the underside edge to the highest fringe of the system. This measurement is normally taken when the iPad is in portrait mode. The peak is necessary for figuring out the system’s total measurement and for making certain compatibility with circumstances and docks.
3. Thickness
To measure the thickness, place the iPad on its aspect and use a ruler or caliper to measure from the highest edge to the underside edge. This measurement is usually taken on the thickest level of the system, which can differ relying on the mannequin and design. The thickness can affect the system’s portability and luxury of holding it for prolonged intervals.
Calculating the Display screen Measurement Diagonally
The commonest methodology for measuring the dimensions of an iPad is to calculate the display screen measurement diagonally. That is completed by measuring the space from one nook of the display screen to the alternative nook. The result’s the diagonal size of the display screen, which is usually expressed in inches.
To calculate the display screen measurement diagonally, you have to a ruler or measuring tape. Place the ruler or measuring tape alongside the diagonal of the display screen, from one nook to the alternative nook. Guarantee that the ruler or measuring tape is straight and that it’s not touching the bezel of the display screen.
After getting measured the diagonal size of the display screen, you should utilize the next desk to find out the dimensions of your iPad:
Diagonal Size (inches) | iPad Mannequin |
---|---|
7.9 | iPad mini |
9.7 | iPad (2018) |
10.2 | iPad (2021) |
10.5 | iPad Air (2019) |
11 | iPad Professional (2018) |
12.9 | iPad Professional (2018) |
Figuring out the Side Ratio
To find out the side ratio of an iPad, you need to measure the display screen’s width and peak. The side ratio is usually expressed as a ratio of the width to peak, corresponding to 4:3 or 16:9. Listed here are detailed steps on measure the iPad’s display screen dimensions:
-
Measure the Width
Use a ruler or measuring tape to measure the horizontal distance throughout the iPad display screen from the left edge to the best edge. File this measurement in millimeters (mm) or inches (in).
-
Measure the Top
Subsequent, measure the vertical distance from the highest fringe of the iPad display screen to the underside edge. File this measurement in mm or in.
-
Calculate the Side Ratio
Divide the width measurement by the peak measurement to acquire the side ratio. For instance, if the width is 240 mm and the peak is 160 mm, then the side ratio could be 240/160 = 3:2.
The next desk summarizes the side ratios of various iPad fashions:
iPad Mannequin Side Ratio iPad (1st technology) 4:3 iPad 2 4:3 iPad 3 4:3 iPad 4 4:3 iPad Air 4:3 iPad Air 2 4:3 iPad Professional (9.7-inch) 4:3 iPad Professional (10.5-inch) 4:3 iPad Professional (11-inch) 4:3 iPad Professional (12.9-inch) 4:3
Using On-line Instruments for Accuracy
There are quite a few on-line instruments that may present fast and correct measurements to your iPad. These instruments usually require you to enter the mannequin or dimensions of your system. Listed here are a couple of common choices:
Device | Options |
---|---|
Apple Assist | Official measurements offered by Apple |
Speccy | Detailed {hardware} data, together with system dimensions |
iFixit Restore Guides | Detailed measurements and directions for system repairs |
To make use of these instruments, merely go to the web site and enter the mannequin or dimensions of your iPad. The software will then give you the corresponding measurements.
Utilizing a Bodily Ruler or Measuring Tape
If you happen to choose a extra hands-on method, you should utilize a bodily ruler or measuring tape to measure your iPad. To do that, place the ruler or tape alongside the sting of the system and browse the measurement. Be sure that you measure from the sting of the display screen to the sting of the system, together with any bezels or frames.
Contemplating the Side Ratio
When measuring the dimensions of your iPad, it is also necessary to think about the side ratio. This refers back to the ratio of the width to the peak of the display screen. For instance, an iPad with a 4:3 side ratio can have a distinct display screen measurement than an iPad with a 16:9 side ratio, even when they’ve the identical diagonal measurement.
Extra Ideas for Correct Measurement
* Use a high-quality ruler or measuring tape for exact measurements.
* Measure from the middle of the display screen to keep away from any distortion.
* If doable, use a software that gives measurements in each inches and centimeters.
* Evaluate your measurements with the official Apple specs to make sure accuracy.
Assessing the Decision
The decision of an iPad, measured in pixels, refers back to the variety of particular person pixels displayed on its display screen. Larger resolutions end in sharper and extra detailed photographs. To measure the decision of an iPad, comply with these steps:
- Navigate to the “Settings” app in your iPad.
- Faucet on “Show & Brightness”.
- Scroll all the way down to the “Decision” part.
- The present decision of your iPad will probably be displayed right here.
- Faucet on “Extra Resolutions” to see a listing of other resolutions accessible to your system.
- Measure the peak from the highest of the show to the underside.
- Measure the width from the left fringe of the show to the best edge.
- Measure the thickness at its thickest level, normally alongside the aspect the place the buttons are positioned.
- Millimeters to inches: To transform millimeters to inches, multiply the variety of millimeters by 0.0393701.
- Centimeters to inches: To transform centimeters to inches, multiply the variety of centimeters by 0.393701.
- Ft to inches: To transform toes to inches, multiply the variety of toes by 12.
- Obtain and set up the appliance from the App Retailer.
- Open the appliance and comply with the directions on the display screen.
- Level the system’s digicam at your iPad.
- Measure the size, width, and peak of your iPad utilizing the app’s instruments.
The accessible resolutions for every iPad mannequin differ relying on its display screen measurement and {hardware} capabilities. Some widespread resolutions for iPads embrace:
iPad Mannequin | Decision |
---|---|
iPad (ninth technology) | 10.2 inches, 2160 x 1620 pixels |
iPad Air (fifth technology) | 10.9 inches, 2360 x 1640 pixels |
iPad Professional 12.9-inch (sixth technology) | 12.9 inches, 2732 x 2048 pixels |
Checking the General Dimensions
To precisely measure the general dimensions of your iPad, seek advice from the official specs offered by Apple or seek advice from the consumer guide that got here along with your system. The size differ relying on the particular iPad mannequin and technology.
This is a desk offering the general dimensions for the newest generations of iPad fashions:
Mannequin | Top | Width | Thickness |
---|---|---|---|
iPad Professional 12.9-inch (fifth technology) | 11.04 inches (280.6 mm) | 8.46 inches (214.9 mm) | 0.25 inches (6.36 mm) |
iPad Professional 11-inch (third technology) | 9.74 inches (247.6 mm) | 7.02 inches (178.5 mm) | 0.23 inches (5.9 mm) |
iPad Air (fifth technology) | 9.76 inches (247.6 mm) | 7.03 inches (178.5 mm) | 0.24 inches (6.1 mm) |
iPad mini (sixth technology) | 7.69 inches (195.4 mm) | 5.30 inches (134.8 mm) | 0.28 inches (7.2 mm) |
When measuring the scale, maintain the next in thoughts:
Understanding Show Phrases
Show measurement: Measured diagonally from nook to nook, excluding any rounded edges or bezels (ie. the body across the display screen). Show measurement is usually expressed in inches.
Side ratio: The ratio of the show’s width to its peak. Frequent side ratios embrace 4:3 (sq.), 16:9 (widescreen), and 16:10 (wider than widescreen).
Decision: The variety of pixels displayed on the display screen. Decision is usually expressed by way of the variety of pixels within the horizontal path by the variety of pixels within the vertical path (e.g., 1920×1080).
Pixel density: The variety of pixels per inch (PPI) of the show. Pixel density impacts the readability and sharpness of the picture, with larger pixel densities leading to sharper photographs.
Colour depth: The variety of bits used to signify every pixel’s shade. Colour depth impacts the vary and accuracy of colours that may be displayed, with larger shade depths leading to extra vibrant and correct colours.
Show kind: The kind of expertise used to show the picture, corresponding to LCD (liquid crystal show), OLED (natural light-emitting diode), or IPS (in-plane switching). Totally different show varieties supply completely different benefits and downsides by way of picture high quality, shade accuracy, and viewing angles.
Retina show: A high-resolution show with a pixel density that’s excessive sufficient that the person pixels should not seen to the human eye at a typical viewing distance. Retina shows present sharp and clear photographs which can be simple on the eyes.
Show Measurement (inches) | Side Ratio | Decision | Pixel Density (PPI) |
---|---|---|---|
9.7 | 4:3 | 1024 x 768 | 264 |
10.2 | 4:3 | 1024 x 768 | 326 |
10.5 | 4:3 | 1668 x 2224 | 265 |
10.9 | 4:3 | 1668 x 2388 | 264 |
12.9 | 4:3 | 2048 x 2732 | 265 |
11 | 16:10 | 2388 x 1668 | 265 |
12.4 | 16:10 | 2560 x 1600 | 265 |
Changing Items of Measurement
If you happen to’re extra snug measuring with completely different models than inches or centimeters, you’ll be able to simply convert your iPad’s dimensions utilizing the next desk:
Unit | Conversion Issue to Inches |
---|---|
Millimeters (mm) | 0.0393701 |
Centimeters (cm) | 0.393701 |
Ft (ft) | 12 |
For instance, to transform the iPad Professional 12.9-inch mannequin’s peak of 11.04 inches to millimeters, you’ll multiply 11.04 by 25.4 (the variety of millimeters in an inch), which provides you 280.44 millimeters.
This is an in depth clarification of the conversions:
By following these directions, you’ll be able to simply measure the dimensions of your iPad in any unit of measurement you like.
Utilizing Third-Social gathering Functions
A number of third-party functions can be found that may enable you measure the dimensions of your iPad. One common choice is the Measure app, which is out there free of charge on the App Retailer. This app means that you can measure the size, width, and peak of your iPad utilizing the system’s digicam. An alternative choice is the Ruler app, which can be accessible free of charge on the App Retailer. This app gives quite a lot of measuring instruments, together with a ruler, a protractor, and a tape measure. To make use of a third-party utility to measure the dimensions of your iPad:
The next desk summarizes the important thing options of the 2 hottest third-party functions for measuring the dimensions of an iPad:
Characteristic | Measure | Ruler |
---|---|---|
Value | Free | Free |
Instruments | Ruler, protractor, tape measure | Ruler, protractor, tape measure |
Digicam | Sure | Sure |
Accuracy | Excessive | Excessive |
Evaluating to Different Machine Sizes
When evaluating the dimensions of an iPad to different units, it is useful to think about the scale of widespread sizes. This is a desk exhibiting the scale of varied iPad sizes and their comparability to different units:
Machine | Show Measurement (inches) | Dimensions (inches) |
---|---|---|
iPad mini (sixth technology) | 8.3 | 7.9 x 5.3 x 0.24 |
iPad (ninth technology) | 10.2 | 9.8 x 6.8 x 0.29 |
iPad Air (fifth technology) | 10.9 | 9.7 x 7 x 0.24 |
iPad Professional 11-inch (4th technology) | 11.0 | 9.7 x 7 x 0.23 |
iPad Professional 12.9-inch (sixth technology) | 12.9 | 11 x 8.5 x 0.25 |
iPhone 14 Professional | 6.1 | 5.8 x 2.8 x 0.31 |
Samsung Galaxy S23+ | 6.6 | 6.2 x 3 x 0.31 |
MacBook Air (M2) | 13.6 | 11.97 x 8.36 x 0.44 |
MacBook Professional 14-inch (M2) | 14.2 | 12.31 x 8.91 x 0.61 |
As you’ll be able to see, iPads are available in a spread of sizes, from the compact iPad mini to the bigger iPad Professional. When selecting the best measurement to your wants, take into account what actions you will be utilizing the system for. If you happen to’re primarily utilizing it for studying, shopping the net, or watching movies, a smaller iPad could also be adequate. Nonetheless, should you’re planning on utilizing it for extra intensive duties like gaming or video enhancing, a bigger iPad with a better decision show could also be a more sensible choice.
Tips on how to Measure Measurement of iPad
To measure the dimensions of an iPad, you could decide the diagonal display screen measurement. This measurement is usually given in inches and represents the space from one nook of the display screen to the alternative nook diagonally.
To measure the diagonal display screen measurement, you should utilize a ruler or tape measure. Place the ruler or tape measure alongside the diagonal of the display screen, making certain that it runs from one nook to the alternative nook. The measurement you get hold of would be the diagonal display screen measurement of the iPad.
For instance, should you measure the diagonal display screen measurement of an iPad and acquire a measurement of 9.7 inches, then the iPad has a 9.7-inch display screen.
Individuals Additionally Ask
Tips on how to measure iPad peak and width?
To measure the peak and width of an iPad, you should utilize the next steps:
1. Place the iPad on a flat floor.
2. Use a ruler or measuring tape to measure the space from the highest fringe of the iPad to the underside edge. This provides you with the peak of the iPad.
3. Subsequent, measure the space from the left fringe of the iPad to the best edge. This provides you with the width of the iPad.